Datasheet4U Logo Datasheet4U.com

74AUP1G79 - Low-power D-type flip-flop

Description

The 74AUP1G79 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.

Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V.

Features

  • s Wide supply voltage range from 0.8 V to 3.6 V s High noise immunity s Complies with JEDEC standards: x JESD8-12 (0.8 V to 1.3 V) x JESD8-11 (0.9 V to 1.65 V) x JESD8-7 (1.2 V to 1.95 V) x JESD8-5 (1.8 V to 2.7 V) x JESD8-B (2.7 V to 3.6 V) s ESD protection: x HBM JESD22-A114-C exceeds 2000 V x MM JESD22-A115-A exceeds 200 V x CDM JESD22-C101-C exceeds 1000 V s Low static power consumption; ICC = 0.9 µA (maximum) s Latch-up performance exceeds 100 mA per JESD 78 Class II s Inputs accept voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AUP1G79 Low-power D-type flip-flop nexperia
74AUP1G74 Low-power D-type flip-flop nexperia
74AUP1G74-Q100 Low-power D-type flip-flop nexperia
74AUP1G00 Low-power 2-input NAND gate NXP Semiconductors
74AUP1G00 SINGLE 2 INPUT POSITIVE NAND GATE Diodes

Other Datasheets by NXP Semiconductors

Part Number Description
74AUP1G02 Low-power 2-input NOR gate
74AUP1G0832 Low Power 3-Input AND-OR Gate
74AUP1G09 Low-power 2-input AND Gate
74AUP1G11 Low-power 3-input AND gate
74AUP1G126 Low-Power buffer/line driver

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 74AUP1G79 Low-power D-type flip-flop; positive-edge trigger Rev. 01 — 12 September 2005 Product data sheet 1. General description The 74AUP1G79 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
Published: |