Datasheet4U Logo Datasheet4U.com

PCAL9539A - Low-voltage 16-bit I2C-bus and SMBus low power I/O port

General Description

The PCAL9539A is a low-voltage 16-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I2C-bus/SMBus applications.

Key Features

  • I2C-bus to parallel port expander.
  • Operating power supply voltage range of 1.65 V to 5.5 V.
  • Low standby current consumption:.
  • 1.5 A (typical at 5 V VDD).
  • 1.0 A (typical at 3.3 V VDD).
  • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs.
  • Vhys = 0.10  VDD (typical).
  • 5 V tolerant I/Os.
  • Active LOW reset input (RESET).
  • Open-drain active LOW interrupt output (INT).
  • 400 kHz Fast-mode.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PCAL6524 Ultra low-voltage translating 24-bit Fm+ I2C-bus/SMBus I/O expander NXP
PCAL6534 Ultra low-voltage translating 34-bit Fm+ I2C-bus/SMBus I/O expander NXP
PCA0102A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0163A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0174A-LF Telecommunications - Satellite Z-Communications

Other Datasheets by NXP Semiconductors

Part Number Description
PCAL9535A Low-voltage 16-bit I2C-bus I/O port
PCAL9555A Low-voltage 16-bit I2C-bus GPIO
PCAL6408A 8-bit I2C-bus/SMBus I/O expander
PCAL6416A Low-voltage translating 16-bit I2C-bus/SMBus I/O expander
PCA2125 SPI Real-time clock/calendar

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCAL9539A Low-voltage 16-bit I2C-bus and SMBus low power I/O port with interrupt and reset Rev. 1 — 3 October 2012 Product data sheet 1. General description The PCAL9539A is a low-voltage 16-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I2C-bus/SMBus applications. NXP I/O expanders provide a simple solution when additional I/Os are needed while keeping interconnections to a minimum, for example, in ACPI power switches, sensors, push buttons, LEDs, fan control, etc. In addition to providing a flexible set of GPIOs, the wide VDD range of 1.65 V to 5.5 V allows the PCAL9539A to interface with next-generation microprocessors and microcontrollers where supply levels are dropping down to conserve power.