Datasheet4U Logo Datasheet4U.com

NTE3094 - Optoisolator

Description

The NTE3094 consists of a pair of inverting optically coupled gates each with a GaAsP emitting diode and a unique integrated detector.

Features

  • D LSTTL/TTL Compatible: 5V Supply D Ultra High Speed D Low Input Current Required D High Common Mode Rejection D 3000V DC Withstand Test Voltage D Typical Data Rate 10M/Bit(s) Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Input Diode (Each Channel) Reverse Voltage, VR.
  • 5V Forward Current, IF Average.

📥 Download Datasheet

Datasheet Details

Part number NTE3094
Manufacturer NTE Electronics (defunct)
File Size 29.93 KB
Description Optoisolator
Datasheet download datasheet NTE3094 Datasheet

Full PDF Text Transcription

Click to expand full text
NTE3094 Optoisolator Dual, High Speed, Open Collector NAND Gate Description: The NTE3094 consists of a pair of inverting optically coupled gates each with a GaAsP emitting diode and a unique integrated detector. The photons are collected in the detector by a photodiode and then amplified by a high gain linear amplifier that drives a Schottky clamped open collector output transistor. each circuit is temperature, current and voltage compensated. This unique isolator design provides maximum DC and AC circuit isolation between input and output while achieving LSTTL/TTL circuit compatibility. The isolator operational parameters are guaranteed from 0° to +70°C, such that a minimum input current of 5mA will sink an eight gate fan–out (13mA) at the output with 5 volt VCC applied to the detector.
Published: |