Datasheet4U Logo Datasheet4U.com

NTE2087 - Integrated Circuit 4-Stage Darlington Array

Description

The NTE2087 is a High Voltage, High Current Darlington Array designed to interface low level logic to a variety of peripheral loads such as relays, solenoids, d c and stepper motors, multiplexed LED and incandescent displays, heaters, and similar loads to 480 watts (

Features

  • D TTL, DTL, PMOS, CMOS Compatible Inputs D Transient Protected Outputs D Handle Loads to 480 Watts D Plastic Dual In.
  • Line Package with Heat Sink Contact Tabs Absolute Maximum Ratings: (TA = +25°C for any one driver unless otherwise specified) Output Voltage, VCEX.
  • . . . 80V Minimum Output Sustaining Voltage, VCE(sus).

📥 Download Datasheet

Datasheet Details

Part number NTE2087
Manufacturer NTE Electronics (defunct)
File Size 20.89 KB
Description Integrated Circuit 4-Stage Darlington Array
Datasheet download datasheet NTE2087 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTE2000 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE2001 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE2003 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE2004 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE214 (NTE74xx) Transistor Logic NTE Electronics

Other Datasheets by NTE Electronics (defunct)

Part Number Description
NTE2080 Integrated Circuit 7-Stage Driver Array
NTE2081 Integrated Circuit 7-Stage Driver Array
NTE2085 Integrated Circuit 4-Stage Darlington Array
NTE2086 Integrated Circuit 4-Stage Darlington Array
NTE2088 Integrated Circuit 4-Segment Darlington Array

Full PDF Text Transcription

Click to expand full text
NTE2087 Integrated Circuit 4–Stage Darlington Array w/Pre–Drive Stage for TTL Description: The NTE2087 is a High–Voltage, High–Current Darlington Array designed to interface low–level logic to a variety of peripheral loads such as relays, solenoids, d–c and stepper motors, multiplexed LED and incandescent displays, heaters, and similar loads to 480 watts (1.5 A per output, 80V, 26% duty cycle). This device is specified with a minimum output breakdown of 50 volts and VCE(sus) minimum of 35 volts measured at 100mA and an output current specification of 1.5A (saturated). A Quad driver Type, the NTE2087 is intended for use with TTL, low–speed TTL, and 5V MOS logic. This device incorporates predriver stages and is most suitable for applications requiring high gain (low input current loading).
Published: |