Datasheet4U Logo Datasheet4U.com

NTE2031 - Integrated Circuit Seven-Segment Gas-Discharge Display Driver

Description

The NTE2031 is a seven channel digit (anode) driver in a 16 Lead DIP type package specifically designed to be used with high voltage, gas

discharge numeric displays.

Features

  • D High Breakdown Voltage:.
  • 55V Typ D Low Input Current for MOS Compatibility D Operable from Either Positive or Negative Supply Voltages D Input Clamp Diodes for DC Restoration D Internal Pull.
  • Down Resistors Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Negative Supply Voltage (Current Limited to.
  • 5mA), VEE.
  • .
  • 60V Negative Supply Current, IEE.

📥 Download Datasheet

Datasheet Details

Part number NTE2031
Manufacturer NTE Electronics (defunct)
File Size 19.61 KB
Description Integrated Circuit Seven-Segment Gas-Discharge Display Driver
Datasheet download datasheet NTE2031 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTE2000 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE2001 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE2003 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE2004 (NTExxxx) Linear Integrated Circuits NTE Electronics
NTE214 (NTE74xx) Transistor Logic NTE Electronics

Other Datasheets by NTE Electronics (defunct)

Part Number Description
NTE2030 Integrated Circuit High Voltage Segment Driver for Gas Discharge Tubes
NTE2032 Integrated Circuit BCD-to-Seven-Segment Decoder Driver
NTE2033 Integrated Circuit Non-Inverting Transistor Array / Low Input Active
NTE20 Silicon Complementary Transistors High Power / Low Collector Saturation Voltage Power Output
NTE2003 Integrated Circuit Dolby B-Type Noise Reduction Processor

Full PDF Text Transcription

Click to expand full text
NTE2031 Integrated Circuit Seven–Segment Gas–Discharge Display Driver Description: The NTE2031 is a seven channel digit (anode) driver in a 16–Lead DIP type package specifically designed to be used with high–voltage, gas–discharge numeric displays. This device requires a low logic level to turn the drivers on with a low input current requirement of any 300µA typically, and is compatible with popular MOS chips. Features: D High Breakdown Voltage: –55V Typ D Low Input Current for MOS Compatibility D Operable from Either Positive or Negative Supply Voltages D Input Clamp Diodes for DC Restoration D Internal Pull–Down Resistors Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Negative Supply Voltage (Current Limited to –5mA), VEE . . . . . . . . . . . . . . . . . . . . . . . .
Published: |