Datasheet4U Logo Datasheet4U.com

NTE1836 - Integrated Circuit Electronic Channel Select System Controller

Description

The NTE1836 contains CPU/PLL excluded peripheral circuits such as band switch, +5V power supply (with RST), sync detector, low

pass filter for color TV/VCR frequency synthesizer channel select system use.

Input, 4 Output) D Video Signal, F

Features

  • D The Band Switch Truth Table can be changed in a short period of time at the user’s option. D The Band Switch is of PNP output type which need not be driven externally. D The OP Amp for Low.
  • Pass Filter is excellant in pulse response because of it’s High.
  • Impedance Input Pin. Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Allowable Power Dissipation (TA ≤ +65°C), PDmax.
  • . . . . 770mW Operating Temperature Ran.

📥 Download Datasheet

Datasheet Details

Part number NTE1836
Manufacturer NTE Electronics (defunct)
File Size 29.77 KB
Description Integrated Circuit Electronic Channel Select System Controller
Datasheet download datasheet NTE1836 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTE1012 Integrated Circuit Module - Hybrid NTE Electronics
NTE1026 Integrated Circuit Module NTE Electronics
NTE1039 Integrated Circuit FM IF Amplifier NTE Electronics
NTE1052 Integrated Circuit Low Noise Preamp NTE Electronics
NTE1053 Integrated Circuit AF High Gain Preamplifier NTE Electronics

Other Datasheets by NTE Electronics (defunct)

Part Number Description
NTE183 Silicon Complementary Transistors
NTE1830 Integrated Circuit Dual Audio Power Amplifier
NTE1831 Integrated Circuit Dual Audio Power Amplifier
NTE1832 BTL Audio Power Amplifier
NTE1834 Integrated Circuit Dual Reversible Motor Driver

Full PDF Text Transcription

Click to expand full text
NTE1836 Integrated Circuit Electronic Channel Select System Control Description: The NTE1836 contains CPU/PLL–excluded peripheral circuits such as band switch, +5V power supply (with RST), sync detector, low–pass filter for color TV/VCR frequency synthesizer channel select system use. Functions: D Band Switch (2–Input, 4–Output) D Video Signal, Flyback Pulse, AFT Output–Used Detection of Tuning Mode and Horizontal Sync Mode D +5V Power Supply, with RST Output (for CPU) D OP Amp for Low–Pass Filter (for Frequency Synthesizer) Features: D The Band Switch Truth Table can be changed in a short period of time at the user’s option. D The Band Switch is of PNP output type which need not be driven externally.
Published: |