Datasheet4U Logo Datasheet4U.com

NTE1791 - Integrated Circuit TV Remote Control Amplifier

Description

The NTE1791 is a silicon monolithic integrated circuit in a 9

Lead SIP type package designed for remote control preamplification of infrared signals.

A PIN photo diode can be directly connected to the input terminal.

Features

  • D Good Immunity from Light Interference: Narrow Bandwidth ±1.3kHz Typ. D Operation Voltage: 6V ±10% D Low Power Consumption: 2.4mA Typ. D High Input Sensitivity: 50µVP.
  • P Typ. D Peak Detector: The Detector Level is Varied with the Input Signal Level. D Output Terminal: Open Collector Output. Easy to Interface to Other Devices. Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC.

📥 Download Datasheet

Datasheet Details

Part number NTE1791
Manufacturer NTE Electronics (defunct)
File Size 21.74 KB
Description Integrated Circuit TV Remote Control Amplifier
Datasheet download datasheet NTE1791 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTE1736 4-Phase Stepping Motor Driver NTE Electronics
NTE1012 Integrated Circuit Module - Hybrid NTE Electronics
NTE1026 Integrated Circuit Module NTE Electronics
NTE1039 Integrated Circuit FM IF Amplifier NTE Electronics
NTE1052 Integrated Circuit Low Noise Preamp NTE Electronics

Other Datasheets by NTE Electronics (defunct)

Part Number Description
NTE179 Germanium PNP Transistor Audio Power Amplifier
NTE1790 Integrated Circuit Video IF / Chroma Deflection
NTE1792 Integrated Circuit Dual Attenuator
NTE1794 Integrated Circuit Volatge Controlled Amp (VCA)
NTE1795 Integrated Circuit RMS Level Sensor

Full PDF Text Transcription

Click to expand full text
NTE1791 Integrated Circuit TV Remote Control Amplifier Description: The NTE1791 is a silicon monolithic integrated circuit in a 9–Lead SIP type package designed for remote control preamplification of infrared signals. A PIN photo diode can be directly connected to the input terminal. This device contains a high gain amplifier, a peak detector, and an output waveform shaper which are necessary for a remote control preamplifier and has improved light interference–rejection characteristics by use of a two–stage tuning circuit. The NTE1791 output polarity is active “LOW”. Features: D Good Immunity from Light Interference: Narrow Bandwidth ±1.3kHz Typ. D Operation Voltage: 6V ±10% D Low Power Consumption: 2.4mA Typ. D High Input Sensitivity: 50µVP–P Typ.
Published: |