N6200 - Step-Down Converter

This page provides the datasheet information for the N6200, a member of the N6200-NIKO Step-Down Converter family.

Description

N6200 is a 1.5Mhz constant frequency, slope compensated current mode PWM step-down converter.

The device integrates a main switch and a synchronous rectifier for high efficiency without an external Schottky diode.

Features

‧ High Efficiency: Up to 92% ‧ 1.5Mhz Constant Switching Frequency ‧ 600mA Output Current at VIN = 3V ‧ Integrated Main switch and synchronous rectifier. No Schottky Diode Required ‧ 2.5V to 5.5V Input Voltage Range ‧ Output Voltage as Low as 0.6V ‧ 100% Duty Cycle in Dropout ‧ Low Quiescent Current : 300µA ‧Slope Compensated Current Mode Control for Excellent Line and Load Transient Response ‧ Short Circuit Protection ‧ Thermal Fault Protection ‧.

NIKO-SEM

📥 Download Datasheet

Datasheet Details

Part number	N6200
Manufacturer	NIKO-SEM
File Size	264.31 KB
Description	Step-Down Converter
Datasheet	N6200 Datasheet
Additional preview pages of the N6200 datasheet.

📁 Similar Datasheet

N620CH - HIGH POWER THYRISTOR (YZPST)

Other Datasheets by NIKO-SEM

Full PDF Text Transcription

Click to expand full text

NIKO-SEM 1.5 MHz, 600mA Synchronous Step-Down Converter N6200 SOT-25 Lead-Free GENERAL DESCRIPTION N6200 is a 1.5Mhz constant frequency, slope compensated current mode PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency without an external Schottky diode. It is ideal for powering portable equipment that runs from a single cell lithium-Ion (Li+) battery. The N6200 can supply 600mA of load current from a 2.5V to 5.5V input voltage. The output voltage can be regulated as low as 0.6V. The N6200 can also run at 100% duty cycle for low dropout operation, extending battery life in portable system. Idle mode operation at light loads provides very low output ripple voltage for noise sensitive applications.

Published: Jul 6, 2018 |