Datasheet4U Logo Datasheet4U.com

PC33702DWB - 3.0 A Switch-Mode Power Supply with Linear Regulator

General Description

Pin 1 Pin Name FREQ Formal Name Oscillator Frequency Definition This selection switcher pin can be adjusted by connecting external resistor RF to the FREQ pin.

The default switching frequency (FREQ pin left open or tied to VDDI) is set to 300 kHz.

Buck Controller Error Amplifier inverting input.

Key Features

  • and to allow space-efficient, compact design. The 33702 incorporates many advanced features; e. g. , precisely maintained up/down power sequencing, ensuring the proper operation and protection of the CPU and power system. Features.
  • Operating Voltage: 2.8 V to 6.0 V.
  • High-Accuracy Output Voltages.
  • Fast Transient Response.
  • Switcher Output Current Up to 3.0 A.
  • Undervoltage Lockout.
  • Power Sequencing.
  • Programmable Watchdog Timer.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
PC33094DW IGNITION CONTROL
PC33253DW Full Bridge Pre-Driver
PC33887VW 5.0 A H-Bridge with Load Current Feedback
PC33888APNB Quad High-Side and Octal Low-Side Switch for Automotive
PC33888PNB Quad High-Side and Octal Low-Side Switch for Automotive
PC33889 System Basis Chip Lite with Low Speed Fault Tolerant CAN Interface
PC33889DW System Basis Chip Lite with Low Speed Fault Tolerant CAN Interface
PC33991DH Gauge Driver Integrated Circuit
PC33991R2 Gauge Driver Integrated Circuit
PC33999EK 16-Output Switch with SPI and PWM Control

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor, Inc. MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document from Analog Marketing: MC33702/D Rev 0, 05/2003 Preliminary Information 3.0 A Switch-Mode Power Supply with Linear Regulator The 33702 provides the means to efficiently supply the Power QUICC™ I, II, and other families of Motorola microprocessors and DSPs. The 33702 incorporates a high-performance switching regulator, providing the direct supply for the microprocessor’s core, and a low dropout (LDO) linear regulator control circuit providing the microprocessor I/O and bus voltage. The switching regulator is a high-efficiency synchronous buck regulator with integrated 50 mΩ N-channel power MOSFETs to provide protection features and to allow space-efficient, compact design.