Datasheet4U Logo Datasheet4U.com

RA35H1516M-01 - 154-162MHz 40W 12.5V MOBILE RADIO

General Description

The RA35H1516M is a 40-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 154- to 162-MHz range.

The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors.

Key Features

  • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=12.5V, VGG=0V).
  • Pout>40W, ηT>50% @ VDD=12.5V, VGG=5V, Pin=50mW.
  • Low-Power Control Current IGG=1mA (typ) at VGG=5V.
  • Module Size: 66 x 21 x 9.88 mm.
  • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 1 4 5 1 2 3 4 5 RF Input (Pin) Gate Voltage (VGG), Power Control Drain Voltage (VDD), Battery RF Output (Pout).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RA3505 Silicon Rectifiers Diotec
RA351 AUTOMOTIVE RECTIFIER GOOD-ARK Electronics
RA351 35Amp Recover Rectifier 50 to 1000 Volts Micro Commercial Components
RA351 Silicon Rectifiers Diotec
RA351GP Glass Passivated Rectifier MCC

Other Datasheets by Mitsubishi Electric

Part Number Description
RA35H1516M-E01 154-162MHz 40W 12.5V MOBILE RADIO
RA35H1516M 154-162MHz 40W 12.5V MOBILE RADIO
RA30H0608M 30-watt RF MOSFET Amplifier Module
RA30H1317M RF MOSFET MODULE
RA30H2127M 210-270MHz 30W 12.5V MOBILE RADIO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUBISHI RF MOSFET MODULE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA35H1516M 154-162MHz 40W 12.5V MOBILE RADIO BLOCK DIAGRAM 2 3 DESCRIPTION The RA35H1516M is a 40-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 154- to 162-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 4V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 4.5V (typical) and 5V (maximum).