Datasheet4U Logo Datasheet4U.com

SY88933V - PECL LOW-POWER LIMITING POST AMPLIFIER

Datasheet Summary

Description

The SY88933V low-power limiting post amplifier is designed for use in fiber-optic receivers.

The device connects to typical transimpedance amplifiers (TIAs).

The linear signal output from TIAs can contain significant amounts of noise and may vary in amplitude over time.

Features

  • Single 3.3V or 5V power supply.
  • DC to 1.25Gbps operation.
  • Low noise PECL data outputs.
  • Chatter-free OC-TTL signal setect (SD) output with internal 6.75kΩ pull-up resistor.
  • TTL EN input.
  • Programmable SD level set (SDLVL).
  • Available in a tiny 10-pin MSOP (3mm) package.

📥 Download Datasheet

Datasheet preview – SY88933V

Datasheet Details

Part number SY88933V
Manufacturer Micrel Semiconductor
File Size 69.84 KB
Description PECL LOW-POWER LIMITING POST AMPLIFIER
Datasheet download datasheet SY88933V Datasheet
Additional preview pages of the SY88933V datasheet.

📁 Similar Datasheet

  • SY8893 - 3A Synchronous Step Down Regulator (Silergy)
  • SY8893E - 3A Synchronous Step Down Regulator (Silergy)
  • SY8893L - Synchronous Step Down Regulator (Silergy)
  • SY8891 - 5.5V/1A Synchronous Step Down Regulator (Silergy)
  • SY8891E - 5.5V/1A Synchronous Step Down Regulator (Silergy)
  • SY8892 - 2A Synchronous Step Down Regulator (Silergy)
  • SY8892E - 2A Synchronous Step Down Regulator (Silergy)
  • SY8801 - Bluetooth headset smart charging case solution (TPS)
  • SY8802 - Bluetooth headset smart charging case solution (TPS)
  • SY8803 - Bluetooth headset smart charging case solution (TPS)
Other Datasheets by Micrel Semiconductor
  • SY88933AL - PECL High-Sensitivity Limiting Post Amplifier
  • SY88932L - SONET/SDH LASER DRIVER
  • SY88902 - LASER DIODE DRIVER
  • SY88903 - 1.25Gbps HIGH-SPEED LIMITING POST AMPLIFIER
  • SY88903AL - PECL High-Sensitivity Limiting Post Amplifier
  • SY88903V - HIGH-SPEED LIMITING POST AMPLIFIER
  • SY88904 - FIBER OPTIC MODULE CONTROLLER
  • SY88905 - LASER DIODE CONTROLLER

Full PDF Text Transcription

Click to expand full text
Micrel, Inc. 3.3V/5V 1.25Gbps PECL LOW-POWER LIMITING POST AMPLIFIER WITH TTL SIGNAL DETECT SY88933V SY88933V FEATURES ■ Single 3.3V or 5V power supply ■ DC to 1.25Gbps operation ■ Low noise PECL data outputs ■ Chatter-free OC-TTL signal setect (SD) output with internal 6.75kΩ pull-up resistor ■ TTL EN input ■ Programmable SD level set (SDLVL) ■ Available in a tiny 10-pin MSOP (3mm) package APPLICATIONS ■ 1.25Gbps Ethernet ■ 1.55Mbps and 622Mbps SONET/SDH ■ High-gain line driver and line receiver ■ 531Mbps and 1062Mbps Fibre Channel ■ Gigabit interface converter DESCRIPTION The SY88933V low-power limiting post amplifier is designed for use in fiber-optic receivers. The device connects to typical transimpedance amplifiers (TIAs).
Published: |