Datasheet4U Logo Datasheet4U.com

SY10H352 - Quad CMOS-to-pecl Translator

General Description

The SY10H352 is a quad translator for interfacing data between a CMOS logic section and the PECL section of digital systems when only a +5.0V VDC power supply is available.

Key Features

  • s Single 5V power supply s All VCC pins isolated on chip s Differentially drive balanced lines s tpd 1.3ns typical s Fully compatible with MC10H352 s Available in 20-pin PLCC package.

📥 Download Datasheet

Datasheet Details

Part number SY10H352
Manufacturer Micrel Semiconductor
File Size 55.20 KB
Description Quad CMOS-to-pecl Translator
Datasheet download datasheet SY10H352 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SY10 SYNCHRONOUS EQUIPMENT STRATUM 3/3E CLOCK UNIT Raltron Electronics
SY100 3 Port Solenoid Valve Rubber Seal SMC
SY100EL11V 5V/3.3V ECL 1:2 Differential Fanout Buffe Microchip
SY100EL16S 5V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER Synergy
SY100EL16V 5V/3.3V ECL Differential Receiver Microchip

Other Datasheets by Micrel Semiconductor

Part Number Description
SY10H350 PECL-to-TTL TRANSLATOR
SY10H351 QUAD TTL/NMOS-to-PECL TRANSLATOR
SY10H600 9-BIT TTL-TO-ECL
SY10H601 9-BIT ECL-TO-TTL
SY10H602 9-BIT LATCHED

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Micrel, Inc. QUAD CMOS-to-PECL TRANSLATOR SY10H352 SY10H352 FEATURES s Single 5V power supply s All VCC pins isolated on chip s Differentially drive balanced lines s tpd 1.3ns typical s Fully compatible with MC10H352 s Available in 20-pin PLCC package DESCRIPTION The SY10H352 is a quad translator for interfacing data between a CMOS logic section and the PECL section of digital systems when only a +5.0V VDC power supply is available. The SY10H352 has CMOS compatible inputs and PECL complementary open-emitter outputs that allow use as an inverting/non-inverting translator or as a differential line driver. When the common strobe input is at a low logic level, it forces all true outputs to the PECL low logic state (≈ +3.2V) and all inverting outputs to the PECL high logic state (≈ +4.1V).