Datasheet4U Logo Datasheet4U.com

MIC5310 - Dual 150mA uCap LDO

General Description

The MIC5310 is a tiny Dual Ultra Low Dropout (ULDO™) linear regulator ideally suited for portable electronics due to its high power supply ripple rejection (PSRR) and ultra low output noise.

Key Features

  • 2.3V to 5.5V input voltage range.
  • Ultra-low dropout voltage ULDO™ 35mV @ 150mA.
  • High PSRR - >70dB @ 1KHz.
  • Ultra-low output noise: 30µVRMS.
  • ±2% initial output accuracy.
  • Tiny 8-pin 2mm x 2mm MLF® leadless package.
  • Excellent Load/Line transient response.
  • Fast start up time: 30µs.
  • µCap stable with 1µF ceramic capacitor.
  • Thermal shutdown protection.
  • Low quiescent current: 75µA per output.
  • Curr.

📥 Download Datasheet

Datasheet Details

Part number MIC5310
Manufacturer Micrel Semiconductor
File Size 317.25 KB
Description Dual 150mA uCap LDO
Datasheet download datasheet MIC5310 Datasheet

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC5311 LowQ Mode Dual 300mA LDO
MIC5312 LowQ Mode Dual 300mA LDO
MIC5315 Low Voltage Dual 300mA LDO
MIC5316 Low Voltage Dual 300mA LDO
MIC5318 High Performance 300mA uCap ULDO
MIC5319 High PSRR LDO Regulator
MIC5301 ULDO
MIC5302 150mA ULDO
MIC5303 Single 300mA CMOS Ultra Small ULDO
MIC5305 150mA UCap Ultra-Low Dropout LDO Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC5310 Dual 150mA µCap LDO in 2mm x 2mm MLF® General Description The MIC5310 is a tiny Dual Ultra Low Dropout (ULDO™) linear regulator ideally suited for portable electronics due to its high power supply ripple rejection (PSRR) and ultra low output noise. The MIC5310 integrates two high-performance 150mA ULDOs into a tiny 2mm x 2mm leadless MLF® package, which provides exceptional thermal package characteristics. The MIC5310 is a µCap design which enables operation with very small ceramic output capacitors for stability, thereby reducing required board space and component cost.