Datasheet4U Logo Datasheet4U.com

MIC5164 - Dual Regulator Controller

General Description

The MIC5164 is a dual regulator controller designed for high speed bus termination.

It offers a simple, low-cost JEDEC-compliant solution for terminating high-speed, lowvoltage digital buses (i.e.

Key Features

  • Input voltage range: 1.35V to 6V Up to 7A VTT Current Tracking programmable output Power Good (PG) signal Wide bandwidth Logic controlled enable input Requires minimal external components DDR, DDR2, DDR3, memory termination.
  • 40°C < TJ < +125°C JEDEC-compliant bus termination for SCSI, GTL, SSTL, HSTL, LV-TTL, Rambus, LV-PECL, LV-ECL, etc.
  • Tiny MSOP-10 package.

📥 Download Datasheet

Datasheet Details

Part number MIC5164
Manufacturer Micrel Semiconductor
File Size 1.02 MB
Description Dual Regulator Controller
Datasheet download datasheet MIC5164 Datasheet

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC5162 Dual Regulator Controller
MIC5163 Dual Regulator Controller
MIC5165 Dual Regulator Controller
MIC5166 3A High-Speed Low V DDR Terminator
MIC5167 Synchronous Buck DDR Memory Terminator
MIC5156 Super LDO Regulator Controller
MIC5157 Super LDO Regulator Controller
MIC5158 Super LDO Regulator Controller
MIC5159 PROGRAMMABLE CURRENT LIMIT UCAP LDO REGULATOR CONTROLLER
MIC5190 Ultra High-Speed High-Current Active Filter/LDO Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC5164 Dual Regulator Controller for DDR3 GDDR3/4/5 Memory and High-Speed Bus Termination General Description The MIC5164 is a dual regulator controller designed for high speed bus termination. It offers a simple, low-cost JEDEC-compliant solution for terminating high-speed, lowvoltage digital buses (i.e. DDR, DDR2, DDR3, SCSI, GTL, SSTL, HSTL, LV-TTL, Rambus, LV-PECL, LV-ECL, etc) with a Power Good (PG) signal. The MIC5164 controls two external N-Channel MOSFETs to form two separate regulators. It operates by switching between either the high-side MOSFET or the low-side MOSFET depending on whether the current is being sourced to the load or sunk by the regulator.