Datasheet4U Logo Datasheet4U.com

MIC3833 - Current-Fed PWM Controllers

Download the MIC3833 datasheet PDF. This datasheet also covers the MIC3832 variant, as both devices belong to the same current-fed pwm controllers family and are provided as variant models within a single manufacturer datasheet.

General Description

The MIC3832 and MIC3833 are unique PWM controllers designed for current-fed, multiple-output or push-pull, switched-mode power supply applications.

Key Features

  • UVLO (undervoltage lockout) with hysteresis, soft start with a programmable time constant, cycle-by-cycle current limiting, a PWM latch to prevent multiple outputs due to noise or ringing, and front-edge blanking. Current-fed topologies eliminate core saturation problems caused by shoot through (cross conduction) of push-pull circuits and reduce stress on the switching transistors. The MIC3832/3 has one PWM stage capable of operating up to 500kHz and two output stages, Q and Q, that operate at o.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MIC3832_MicrelSemiconductor.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MIC3833
Manufacturer Micrel Semiconductor
File Size 106.10 KB
Description Current-Fed PWM Controllers
Datasheet download datasheet MIC3833 Datasheet

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC38300 3A High-Efficiency Low Dropout Regulator
MIC3832 Current-Fed PWM Controllers
MIC3838 Flexible Push-Pull PWM Controller
MIC3839 Flexible Push-Pull PWM Controller
MIC384 Three-Zone Thermal Supervisor Advance Information
MIC38C42 BiCMOS Current-Mode PWM Controllers
MIC38C42A BiCMOS Current-Mode PWM Controllers
MIC38C43 BiCMOS Current-Mode PWM Controllers
MIC38C43A BiCMOS Current-Mode PWM Controllers
MIC38C44 BiCMOS Current-Mode PWM Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MIC3832/3833 Micrel MIC3832/3833 Current-Fed PWM Controllers Not Recommended for New Designs General Description The MIC3832 and MIC3833 are unique PWM controllers designed for current-fed, multiple-output or push-pull, switched-mode power supply applications. The MIC3832/3 features UVLO (undervoltage lockout) with hysteresis, soft start with a programmable time constant, cycle-by-cycle current limiting, a PWM latch to prevent multiple outputs due to noise or ringing, and front-edge blanking. Current-fed topologies eliminate core saturation problems caused by shoot through (cross conduction) of push-pull circuits and reduce stress on the switching transistors.