The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physicallayer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable.
Key Features
to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9031 I/Os and the ® board. The LinkMD TDR-based cable diagnostic identifies faulty copper cabling. Remote and local loopback functions verify analog and digital data paths. The KSZ9031RNX is available in a 48-pin, lead-free QFN package (see “Ordering Information”). Data sheets and support documentation are available on Micrel’s web site at:.
Full PDF Text Transcription for KSZ9031RNX (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
KSZ9031RNX. For precise diagrams, and layout, please refer to the original PDF.
KSZ9031RNX Gigabit Ethernet Transceiver with RGMII Support Data Sheet Rev. 1.0 General Description The KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Bas...
View more extracted text
he KSZ9031RNX is a completely integrated triple-speed (10Base-T/100Base-TX/1000Base-T) Ethernet physicallayer transceiver for transmission and reception of data on standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ9031RNX provides the Reduced Gigabit Media Independent Interface (RGMII) for direct connection to RGMII MACs in Gigabit Ethernet processors and switches for data transfer at 10/100/1000Mbps. The KSZ9031RNX reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V
KSZ9031RNX Datasheet
