Datasheet4U Logo Datasheet4U.com

MAX1912 - 1.5x/2x High-Efficiency White LED Charge Pumps

General Description

The MAX1910/MAX1912 power LEDs with a regulated output voltage or current (up to 120mA) from an unregulated input supply (2.7V to 5.3V).

These are complete DC-DC converters requiring only four small ceramic capacitors and no inductors.

Key Features

  • High-Efficiency 1.5x/2x Charge Pumps.
  • Low Input Ripple with 750kHz Operation.
  • 200mV Current-Sense Threshold Reduces Power Loss.
  • Current- or Voltage-Regulated Charge Pump.
  • Up to 120mA Output Current.
  • No Inductors Required.
  • Small Ceramic Capacitors.
  • Regulated ±5% LED Current.
  • Load Disconnected in Shutdown.
  • 1µA Shutdown Current.
  • Small 10-Pin µMAX Package MAX1910/MAX1912.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX191 12-Bit Sampling ADC
MAX1910 1.5x/2x High-Efficiency White LED Charge Pumps
MAX1916 Low-Dropout / Constant-Current Triple White LED Bias Supply
MAX1917 Tracking / Sinking and Sourcing / Synchronous Buck Controller for DDR Memory and Termination Supplies
MAX190 Low-Power / 12-Bit Sampling ADCs
MAX1901 Low-Noise Power-Supply Controllers
MAX1902 Low-Noise Power-Supply Controllers
MAX1904 Low-Noise Power-Supply Controllers
MAX192 Low-Power / 8-Channel / Serial 10-Bit ADC
MAX1924 Advanced Li+ Battery-Pack Protectors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2290; Rev 2; 3/04 1.5x/2x High-Efficiency White LED Charge Pumps General Description The MAX1910/MAX1912 power LEDs with a regulated output voltage or current (up to 120mA) from an unregulated input supply (2.7V to 5.3V). These are complete DC-DC converters requiring only four small ceramic capacitors and no inductors. Input ripple is minimized by a unique regulation scheme that maintains a fixed 750kHz switching frequency over a wide load range. Also included are logic-level shutdown and soft-start to reduce input current surges at startup. The MAX1910 has two automatically selected operating modes: 1.5x and 2x. 1.5x mode improves efficiency at higher input voltages, while 2x mode maintains regulation at lower input voltages. The MAX1912 operates only in 1.5x mode.