Datasheet4U Logo Datasheet4U.com

MAX2980 - Powerline Communication Analog Front-End Transceiver

General Description

The MAX2980 powerline communication analog frontend (AFE) integrated circuit (IC) is a state-of-the-art CMOS device that delivers high performance and low cost.

Key Features

  • Fully Integrated Line Driver and Receiver.
  • Seamless Interface to Digital PHY ICs.
  • Fully Integrated 10-Bit ADC and DAC with 50MHz Sampling.
  • 54dB Adaptive Gain Control.
  • Minimum Line Impedance Capability as Low as 10Ω.
  • 3.0V to 3.6V I/O.
  • 250mA in Rx Mode and/or 160mA in Tx Mode at 3.3V.
  • 64-Pin TQFP Package MAX2980 Ordering Information PART MAX2980CCB TEMP RANGE 0°C to +70°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX2981 Integrated Powerline Communication Analog Front-End Transceiver And Line Driver Maxim Integrated Products
MAX293 8th-Order / Lowpass / Elliptic / Switched-Capacitor Filters Maxim
MAX294 8th-Order / Lowpass / Elliptic / Switched-Capacitor Filters Maxim
MAX297 8th-Order / Lowpass / Elliptic / Switched-Capacitor Filters Maxim
MAX2990 10kHz to 490kHz OFDM-Based Power Line Communication Modem Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX2986 Integrated Powerline Digital Transceiver
MAX2900 200mW Single-Chip Transmitter
MAX2901 200mW Single-Chip Transmitter
MAX2902 200mW Single-Chip Transmitter
MAX2903 200mW Single-Chip Transmitter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3534; Rev 0; 1/05 Powerline Communication Analog Front-End Transceiver General Description The MAX2980 powerline communication analog frontend (AFE) integrated circuit (IC) is a state-of-the-art CMOS device that delivers high performance and low cost. This highly integrated design combines an analogto-digital converter (ADC), digital-to-analog converter (DAC), signal conditioning, and line driver. The MAX2980 substantially reduces previously required system components, while compatible with third-party HomePlug® devices. This device interfaces with many companion Digital PHY ICs to provide a complete powerline communication solution. The advanced design of the MAX2980 allows operation without external control, enabling simplified connection to a variety of HomePlug Digital PHY ICs.