Datasheet4U Logo Datasheet4U.com

MAX17559 - Synchronous Step-Down Controller

General Description

The MAX17559 is a dual-output, synchronous step-down controller that drives nMOSFETs.

The device uses a constant-frequency, peak-current-mode architecture.

The two outputs can be configured as independent voltage rails.

Key Features

  • Wide Range of Operation.
  • Wide 4.5V to 60V Input Voltage Range.
  • Wide 0.8V to 24V Output Voltage Range.
  • RSENSE or Inductor DCR Current-Sensing.
  • Fixed 180° Out-of-Phase Operation.
  • Adjustable 100kHz to 2.2MHz Switching Frequency.
  • Independent Enable and PGOOD.
  • Available in a Lead(Pb)-Free 7mm x 7mm, 32-Pin TQFP Package.
  • Enhances Power Efficiency.
  • Low-Impedance Gate Drives for High Efficiency.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX17551 Synchronous Step-Down DC-DC Converter
MAX17552A Synchronous Step-Down DC-DC Converter
MAX17505 1.7A Synchronous Step-Down DC-DC Converter
MAX17509 Synchronous Step-Down DC-DC Converter
MAX17510 Low-Voltage DDR Linear Regulators
MAX17511 3-/2-/1-Phase + 2-/1-Phase Quick-PWM Controllers
MAX17511C 3-/2-/1-Phase + 2-/1-Phase Quick-PWM Controllers
MAX17511N 3-/2-/1-Phase + 2-/1-Phase Quick-PWM Controllers
MAX17511T 3-/2-/1-Phase + 2-/1-Phase Quick-PWM Controllers
MAX17521 Synchronous Step-Down DC-DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX17559 EVALUATION KIT AVAILABLE 60V, Dual-Output, Synchronous Step-Down Controller General Description The MAX17559 is a dual-output, synchronous step-down controller that drives nMOSFETs. The device uses a constant-frequency, peak-current-mode architecture. The two outputs can be configured as independent voltage rails. Input capacitor size is minimized by running the two outputs 180° out-of-phase. The IC supports current sensing using either an external current-sense resistor for accuracy or an inductor DCR for improved system efficiency. Current foldback or latchoff limits MOSFET power dissipation under short-circuit conditions. The IC provides independent adjustable soft-start/stop for each output and can start up monotonically into a prebiased output.