Datasheet4U Logo Datasheet4U.com

MAX17411 - 3-/2-/1-Phase + 2-/1-Phase Quick-PWM Controllers

General Description

The MAX17411/MAX17511/MAX17511C/MAX17511N/ MAX17511T are dual-output, step-down, constant on-time Quick-PWMK controllers for VR12/IMVP-7 CPU core supplies.

The controllers consist of two high-current switching power supplies for CPU and GFX cores.

Key Features

  • detect a fault, the controller shuts down both outputs. The multiphase regulators include transient-phase overlap and active overshoot suppression, which speed up the response time and reduce the total output capacitance. The CPU and GFX outputs are controlled independently by writing the appropriate data into a functionmapped register file. VID code transitions and soft-start are enabled with a precision slew-rate control circuit. The SVID interface also allows each regulator to be individually.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX17000 Complete DDR2 and DDR3 Memory Power-Management Solution
MAX17003 Main PowerSupply Controllers
MAX17003A Main PowerSupply Controllers
MAX17004 Main PowerSupply Controllers
MAX17004A Main PowerSupply Controllers
MAX17007 Dual and Combinable QPWM Graphics Core Controllers
MAX17007B Dual and Combinable QPWM Graphics Core Controllers
MAX1701 Step-Up DC-DC Converters
MAX17019 High-Input-Voltage Quad-Output Controller
MAX17024 Single Quick-PWM Step-Down Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX17411/MAX17511/MAX17511C/MAX17511N/MAX17511T 19-5742; Rev 1; 7/11 EVAALVUAAILTAIOBNLEKIT Dual-Output, 3-/2-/1-Phase + 2-/1-Phase Quick-PWM Controllers for VR12/IMVP7 General Description The MAX17411/MAX17511/MAX17511C/MAX17511N/ MAX17511T are dual-output, step-down, constant on-time Quick-PWMK controllers for VR12/IMVP-7 CPU core supplies. The controllers consist of two high-current switching power supplies for CPU and GFX cores. The CPU regulator (regulator A) is a three-phase constant on-time architecture. The GFX regulator (regulator B) is also constant on-time architecture. The MAX17411 supports 2-phase operation and the MAX17511/MAX17511C/MAX17511N/MAX17511T support 1-phase operation.