Datasheet4U Logo Datasheet4U.com

DS2413 - 1-Wire Dual Channel Addressable Switch

General Description

The DS2413 is a dual-channel programmable I/O 1-Wire® chip.

The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V.

Control and sensing of the PIO pins is performed with a dedicated device-level command protocol.

Key Features

  • Controls Dual Programmable High Voltage, High Current I/O Port Pins from a Single Micro Port Pin o Open-Drain Programmable I/O Pins Support 20mA max Continuous Current Sink o 28V (max) PIO Pin Operating Voltage o On-Resistance of PIO Pulldown Transistor 20Ω max; OFF Resistance 1MΩ min o Parasitic Power Supply Through 1-Wire.
  • Minimalist 1-Wire Interface Lowers Cost and Interface Complexity o Communicates to Host with a Single Digital Signal at 14.9kb or 100kbps o Switchpoint Hy.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS2411 Silicon Serial Number
DS2417 1-Wire Time Chip
DS2401 Silicon Serial Number
DS2405 Addressable Switch
DS2406 Dual Addressable Switch Plus 1Kb Memory
DS2408 1-Wire 8-Channel Addressable Switch
DS2422 1-Wire Temperature/Datalogger
DS2423 4kbit 1-Wire RAM
DS2430A 256-Bit 1-Wire EEPROM
DS2431 1-Wire EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5316; 3/15 DS2413 1-Wire Dual Channel Addressable Switch GENERAL DESCRIPTION The DS2413 is a dual-channel programmable I/O 1-Wire® chip. The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V. Control and sensing of the PIO pins is performed with a dedicated device-level command protocol. To provide a high level of fault tolerance in the end application, the 1-Wire IO and PIO pins are all capable of withstanding continuous application of voltages up to 28V max. Communication and operation of the DS2413 is performed with the single contact Maxim/Dallas 1-Wire serial interface.