Datasheet4U Logo Datasheet4U.com

DS1312 - Nonvolatile Controller

General Description

VCCI VCCO VBAT - +5V Power Supply Input - SRAM Power Supply Output - Backup Battery Input CEI - Chip Enable Input CEO TOL BW - Chip Enable Output - VCC Tolerance Select - Battery Warning Output (Open Drain) RST GND NC - Reset Output (Open Drain) - Ground - No Connection DESCRIPTION The DS131

Key Features

  • Converts CMOS SRAM into nonvolatile memory.
  • Unconditionally write-protects SRAM when VCC is out of tolerance.
  • Automatically switches to battery backup supply when VCC power failure occurs.
  • Monitors voltage of a lithium cell and provides advanced warning of impending battery failure.
  • Signals low-battery condition on active low Battery Warning output signal.
  • Optional 5% or 10% power-fail detection.
  • Space-saving 8-pin DIP and SOIC packages.
  • Optional 16-pin S.

📥 Download Datasheet

Full PDF Text Transcription for DS1312 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for DS1312. For precise diagrams, and layout, please refer to the original PDF.

19-6306; Rev 6/12 ` DS1312 Nonvolatile Controller with Lithium Battery Monitor FEATURES  Converts CMOS SRAM into nonvolatile memory  Unconditionally write-protects SRAM...

View more extracted text
MOS SRAM into nonvolatile memory  Unconditionally write-protects SRAM when VCC is out of tolerance  Automatically switches to battery backup supply when VCC power failure occurs  Monitors voltage of a lithium cell and provides advanced warning of impending battery failure  Signals low-battery condition on active low Battery Warning output signal  Optional 5% or 10% power-fail detection  Space-saving 8-pin DIP and SOIC packages  Optional 16-pin SOIC and 20-pin TSSOP versions reset processor when power failure occurs and hold processor in reset during system power-up  Industrial temperature range of -40°C to +85°C PI