Datasheet4U Logo Datasheet4U.com

MAX17010 - Internal-Switch Boost Regulator

General Description

The MAX17010 contains a high-performance step-up switching regulator, a high-speed operational amplifier (op amp), and a high-voltage level-shifting scan driver.

The device is optimized for thin-film transistor (TFT) liquidcrystal display (LCD) applications.

Key Features

  • undervoltage lockout (UVLO), soft-start, and internal current limit. The high-current op amp is designed to drive the LCD backplane (VCOM). The amplifier features high output current (±150mA), fast slew rate (45V/µs), wide bandwidth (20MHz), and rail-to-rail inputs and outputs. The high-voltage, level-shifting scan driver is designed to work with panels that incorporate row drivers on the panel glass. Its eight outputs swing from +30V (max) to -10V and can swiftly drive capacitive loads. The MAX.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX17014 Low-Cost Multiple-Output Power Supply
MAX17015 High-Performance Chargers
MAX17015A High-Performance Chargers
MAX17015B Highest Switching-Frequency Notebook Battery Chargers
MAX17017 Quad-Output Controller
MAX17000A Complete DDR2 and DDR3 Memory Power-Management
MAX17005 High-Performance Chargers
MAX17005A High-Performance Chargers
MAX17005B Highest Switching-Frequency Notebook Battery Chargers
MAX17006 High-Performance Chargers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0709; Rev 0; 3/07 KIT ATION EVALU E L B A IL AVA www.DataSheet4U.com Internal-Switch Boost Regulator with Integrated High-Voltage Level Shifter and Op Amp General Description The MAX17010 contains a high-performance step-up switching regulator, a high-speed operational amplifier (op amp), and a high-voltage level-shifting scan driver. The device is optimized for thin-film transistor (TFT) liquidcrystal display (LCD) applications. The step-up DC-DC converter provides the regulated supply voltage for the panel-source driver ICs. The converter is a 1.2MHz current-mode regulator with an integrated 20V n-channel power MOSFET. The high switching frequency allows the use of ultra-small inductors and ceramic capacitors.