Datasheet4U Logo Datasheet4U.com

DS28E10 - 1-Wire SHA-1 Authenticator

General Description

The DS28E10 combines secure challenge-and-response authentication functionality based on the FIPS 180-3 specified Secure Hash Algorithm (SHA-1) with 224 bits of one-time programmable user EPROM in a single chip.

Once written, the memory is automatically write protected.

📥 Download Datasheet

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS28E02 1-Wire SHA-1 Authenticator 1Kb EEPROM
DS28E25 DeepCover Secure Authenticator
DS28CM00 SMBus Silicon Serial Number
DS28CN01 1Kbit I2C/SMBus EEPROM
DS28CZ04 EEPROM
DS2030AB Single-Piece 256kb Nonvolatile SRAM
DS2030W 3.3V Single-Piece 256k Nonvolatile SRAM
DS2030Y Single-Piece 256kb Nonvolatile SRAM
DS2045AB Single-Piece 1M Nonvolatile SRAM
DS2045L Single-Piece 1M Nonvolatile SRAM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS28E10 ABRIDGED DATA SHEET 219-0009; Rev 2; 4/11 EVAALVUAAILTAIOBNLEKIT 1-Wire SHA-1 Authenticator General Description The DS28E10 combines secure challenge-and-response authentication functionality based on the FIPS 180-3 specified Secure Hash Algorithm (SHA-1) with 224 bits of one-time programmable user EPROM in a single chip. Once written, the memory is automatically write protected. Additionally, each device has its own guaranteed unique 64-bit ROM identification number (ROM ID) that is factory programmed into the chip. Memory writes are performed 4 bytes at a time. A secure and low-cost factory programming service is available to preprogram device data, including the SHA-1 security data components. The device communicates over the single-contact 1-Wire® bus.