Datasheet4U Logo Datasheet4U.com

XR3160E - RS-232/RS-485/RS-422 TRANSCEIVER

General Description

The XR3160 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards.

Full operation requires only four external charge pump capacitors.

The RS-485/RS-232 pin selects RS-485 mode when high and RS-232 mode when low.

Key Features

  • Pin Compatible Upgrade for MAX3160 (20 SSOP).
  • IEC Level 4 ESD Protection.
  • ±15kV IEC 61000-4-2 Air Gap Discharge.
  • ± 8kV IEC 61000-4-2 Contact Discharge.
  • ±15kV Human Body Model (HBM).
  • 20Mbps RS-485 and 1Mbps RS-232 Data Rates.
  • Pin-Selectable 250kbps Slew Limiting.
  • Single Supply Operation from +3V to +5.5V.
  • 2 Drivers, 2 Receivers RS-232/V.28.
  • 1 Driver, 1 Receiver RS-485/422.
  • Full or Half Duplex Configuration.
  • 1/8th Unit Load, up to 256 re.

📥 Download Datasheet

Datasheet Details

Part number XR3160E
Manufacturer MaxLinear
File Size 1.01 MB
Description RS-232/RS-485/RS-422 TRANSCEIVER
Datasheet download datasheet XR3160E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR3160E RS-232/RS-485/RS-422 TRANSCEIVER Exar

Other Datasheets by MaxLinear

Part Number Description
XR31233 CAN Bus Transceivers
XR31234 CAN Bus Transceivers
XR31235 CAN Bus Transceivers
XR32220 2-Driver/2-Receiver Intelligent RS-232 Transceiver
XR32330 3-Driver/3-Receiver Intelligent RS-232 Transceiver
XR33032 WIDE SUPPLY 18V TOLERANT RS-485 / RS-422 TRANSCEIVERS
XR33035 WIDE SUPPLY 18V TOLERANT RS-485 / RS-422 TRANSCEIVERS
XR33038 WIDE SUPPLY 18V TOLERANT RS-485 / RS-422 TRANSCEIVERS
XR33052 RS-485/RS-422 Transceivers
XR33053 RS-485/RS-422 Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XR3160E RS-232/RS-485/RS-422 TRANSCEIVER WITH 15KV ESD PROTECTION Jan 2018 Rev. 1.0.1 GENERAL DESCRIPTION The XR3160 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards. Full operation requires only four external charge pump capacitors. The RS-485/RS-232 pin selects RS-485 mode when high and RS-232 mode when low. The HALF/FULL pin configures the RS-485 modes as either half or full duplex. The high speed drivers operate up to 20Mbps in RS485/422 modes, and up to 1Mbps in RS-232 mode. All drivers can be slew limited to 250kbps in any mode to minimize electromagnetic interference (EMI) by setting the dedicated SLEW pin low.