SP2526A Datasheet Dual Channel USB Power Distribution Switch

Manufacturer: MaxLinear

SP2526A dual channel usb power distribution switch by MaxLinear - Datasheet Preview

Datasheet Details

Part number	SP2526A
Manufacturer	MaxLinear
File Size	521.71 KB
Description	Dual Channel USB Power Distribution Switch
Download	SP2526A Download (PDF)

General Description

The SP2526A device is a dual +3.0V to +5.5V USB Supervisory Power Control Switch ideal for self-powered and bus-powered Universal Serial Bus (USB) applications.

Each switch has low on-resistance (110mΩ typical) and can supply 500mA minimum.

The fault currents are limited to 1.0A typical and the flag output pin for each switch is available to indicate fault conditions to the USB controller.

Overview

January 2020 SP2526A Dual Channel USB Power Distribution Switch Rev.

2.1.

Key Features

+3.0V to +5.5V Input Voltage Range.
Two Independent Power Switches.
Two Error Flag Outputs, Open Drain.
2.6V Undervoltage Lockout.
1.25A Short Circuit Current Limit.
150mΩ Maximum On-Resistance.
110μA On-State Supply Current.
1μA Shutdown Current.
Output can be Forced Higher than Input (Off-State).
Thermal Shutdown.
1ms Soft Start Power Up, Fast Turn Off.
Active-high Version: SP2526A-1.

📁 Similar Datasheet

Part Number	Description	Manufacturer
SP2526A	Dual Channel USB Power Distribution Switch	Exar
SP2526A	Dual USB High-Side Power Switch	Sipex Corporation
SP2526	+3.0V to +5.5V USB Power Control Switch	Sipex

More Datasheets from MaxLinear

Part Number	Description
SP202E	High Performance RS-232 Line Drivers / Receivers
SP206	+5V RS-232 Serial Transceivers
SP207	+5V RS-232 Serial Transceivers
SP208	+5V RS-232 Serial Transceivers
SP211	+5V RS-232 Serial Transceivers
SP232A	Enhanced RS-232 Line Drivers/Receivers
SP232E	High Performance RS-232 Line Drivers / Receivers
SP233A	Enhanced RS-232 Line Drivers/Receivers
SP233E	High Performance RS-232 Line Drivers / Receivers