Datasheet4U Logo Datasheet4U.com

28F2000PPC - MX28F2000P

Description

The MX28F2000P is a 2-mega bit Flash memory organized as 256K bytes of 8 bits each.

MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.

The MX28F2000P is packaged in 32-pin PDIP, PLCC and TSOP.

Features

  • 262,144 bytes by 8-bit organization.
  • Fast access time: 70/90/120 ns.
  • Low power consumption.
  • 50mA maximum active current.
  • 100uA maximum standby current.
  • Programming and erasing voltage 12V ± 5%.
  • Command register architecture.
  • Byte Programming (15us typical).
  • Auto chip erase 5 seconds typical (including preprogramming time).
  • Block Erase.
  • Optimized high density blocked architecture.
  • Four 4-K.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
28F200B5 SMART 5 BOOT BLOCK FLASH MEMORY Intel
28F200BL-B LOW-POWER BOOT BLOCK FLASH MEMORY Intel
28F200BL-T LOW-POWER BOOT BLOCK FLASH MEMORY Intel
28F200BX-B BOOT BLOCK FLASH MEMORY Intel
28F200BX-T BOOT BLOCK FLASH MEMORY Intel

Other Datasheets by Macronix

Part Number Description

Full PDF Text Transcription

Click to expand full text
FEATURES • 262,144 bytes by 8-bit organization • Fast access time: 70/90/120 ns • Low power consumption – 50mA maximum active current – 100uA maximum standby current • Programming and erasing voltage 12V ± 5% • Command register architecture – Byte Programming (15us typical) – Auto chip erase 5 seconds typical (including preprogramming time) – Block Erase • Optimized high density blocked architecture – Four 4-KB blocks (Top) – Fourteen 16-KB blocks – Four 4-KB blocks (Bottom) MX28F2000P 2M-BIT [256K x 8] CMOS FLASH MEMORY • Auto Erase (chip & block) and Auto Program – DATA polling – Toggle bit • 10,000 minimum erase/program cycles • Latch-up protected to 100mA from -1 to VCC+1V • Advanced CMOS Flash memory technology • Compatible with JEDEC-standard byte-wide 32-pin EPROM pinouts • Package
Published: |