Datasheet4U Logo Datasheet4U.com

MP5077GG - 7A Load Switch

Download the MP5077GG datasheet PDF. This datasheet also covers the MP5077 variant, as both devices belong to the same 7a load switch family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP5077 provides up to 7A load protection over a 0.5V to 5.5V voltage range.

With the small RDSON in tiny package, MP5077 is a very high efficiency and space saving solution for notebooks, tablets, and other portable/batteryoperated applications.

Key Features

  • The maximum load at the output (source) is current limited. This is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor from the ILIM pin to ground. An internal charge pump drives the gate of the power device, allowing a very low on-resistance DMOS power FET of just 10mΩ. The MP5077 is available in a tiny 12-pin 2mmx2mm QFN package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP5077-MPS.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Monolithic Power Systems

Part Number Description
MP5077 7A Load Switch
MP5073 5.5V 2A Low RDSON Load Switch
MP5073GG 5.5V 2A Low RDSON Load Switch
MP5075 Load Switch
MP5075GTF Load Switch
MP5075L Load Switch
MP5075LGTF Load Switch
MP5000 5A Programmable Current Limit Switch
MP5000A 5A Programmable Current Limit Switch
MP5000ADQ 5A Programmable Current Limit Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP5077 5.5V, 7A, Low RDSON Load Switch With Programmable Current Limit DESCRIPTION The MP5077 provides up to 7A load protection over a 0.5V to 5.5V voltage range. With the small RDSON in tiny package, MP5077 is a very high efficiency and space saving solution for notebooks, tablets, and other portable/batteryoperated applications. With the soft start function, the MP5077 can avoid inrush current during circuit start up. MP5077 also provides programmable soft start time, output discharge functions, OCP and thermal shutdown features. The maximum load at the output (source) is current limited. This is accomplished by utilizing a sense FET topology. The magnitude of the current limit is controlled by an external resistor from the ILIM pin to ground.