Datasheet4U Logo Datasheet4U.com

MP4059 - Single-Stage PFC Flyback Controller

General Description

The MP4059 is a single-stage PFC flyback controller for LED deep-dimming applications.

The MP4059 can regulate constant current to an LED load over a wide 1% to 100% dimming range without flickering or shimmering.

Key Features

  • enhance system reliability and safety greatly. Protection features include over-voltage protection (OVP), short-circuit protection (SCP), primary-side over-current protection (OCP), brown-out protection, cycle-by-cycle current limit protection, under-voltage lockout (UVLO), and auto-restart over-temperature protection (OTP). The MP4059 is available in a SOIC-8 package.

📥 Download Datasheet

Other Datasheets by Monolithic Power Systems

Part Number Description
MP4059GS Single-Stage PFC Flyback Controller
MP4050 LED Driver
MP4050A High-Brightness LED Driver
MP4050AGJ High-Brightness LED Driver
MP4050AGS High-Brightness LED Driver
MP4050GJ LED Driver
MP4050GS LED Driver
MP4000 White LED Driver Controller
MP4000DS White LED Driver Controller
MP4001 Universal Input High Brightness White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology MP4059 Single-Stage PFC Flyback Controller with Primary-Side Feedback, for LED Drivers Down to 1% Dimming DESCRIPTION The MP4059 is a single-stage PFC flyback controller for LED deep-dimming applications. The MP4059 can regulate constant current to an LED load over a wide 1% to 100% dimming range without flickering or shimmering. The MP4059 is a primary-side controller without any secondary-side feedback components or optocouplers, simplifying the LED driver design significantly. The MP4059 integrates power factor correction and works in valley switching mode to achieve high efficiency. The MP4059 achieves ultra-low power consumption and can shut off the LED in standby mode, making it suitable for smart lighting applications.