Datasheet4U Logo Datasheet4U.com

MP3398EGP - WLED Controller

Download the MP3398EGP datasheet PDF. This datasheet also covers the MP3398E variant, as both devices belong to the same wled controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP3398E is a step-up controller with four current channels designed to drive WLED arrays for large LCD panel backlighting applications.

The MP3398E is able to expand the number of LED channels with two or more ICs in parallel sharing a single power source.

Key Features

  • include over-current protection (OCP), over-temperature protection (OTP), under-voltage protection (UVP), overvoltage protection (OVP), LED short/open protection, and inductor/diode short protection. The MP3398E is available in TSSOP-16EP, SOIC-16 and PDIP-16 packages.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP3398E-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP330 (MP312 / MP330) Power Film Resistors Caddock
MP30 Power Rheostats Vishay Siliconix
MP3005 Current and Voltage Controls Current Transformer Carlo Gavazzi
MP312 (MP312 / MP330) Power Film Resistors Caddock
MP320A Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP3398EGF WLED Controller
MP3398EGS WLED Controller
MP3398E WLED Controller
MP3393 8-String Step-Up White LED Driver
MP3393EF 8-String Step-Up White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology MP3398E 4-String, Max 400mA/String, 80V Return, Step-Up, WLED Controller DESCRIPTION The MP3398E is a step-up controller with four current channels designed to drive WLED arrays for large LCD panel backlighting applications. The MP3398E is able to expand the number of LED channels with two or more ICs in parallel sharing a single power source. The MP3398E employs peak-current mode with a fixed switching frequency. The frequency is programmable through an external setting resistor. The MP3398E drives an external MOSFET to boost up the output voltage from a 4.5V to 33V input supply and regulates the current in each LED string to the value set by an external current-setting resistor. The MP3398E applies four internal current sources for current balancing.