Datasheet4U Logo Datasheet4U.com

MP2670DQ - Li-ion Battery Charger Protection Circuit

Download the MP2670DQ datasheet PDF. This datasheet also covers the MP2670 variant, as both devices belong to the same li-ion battery charger protection circuit family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP2670 is a high-performance single cell Li-Ion/Li-Polymer battery charger protection circuit.

By integrating high voltage input protection into the charger IC, the MP2670 can tolerate an input surge up to +30V.

Key Features

  • input over voltage protection (OVP), battery over voltage protection (BOVP) and over charge current protection (OCP). The device also provides fault indications to the system when any of the protection events happens. For guaranteed safe operation, the MP2670 monitors its own internal temperature and turns off the MOSFET bridging VIN and OUT when the die temperature exceeds 150oC. The MP2670 is available in a 10-pin 3mm x 3mm QFN package. MP2670 Li-ion Battery Charger Protection Circuit.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP2670-MPS.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2670 Li-ion Battery Charger Protection Circuit
MP2671 Li-ion Battery Charger Protection Circuit
MP2671DL Li-ion Battery Charger Protection Circuit
MP2672 Boost Charger
MP2672A Boost Charger
MP2676 Li-Ion Charger Protection
MP2676EG Li-Ion Charger Protection
MP2602 1A Linear Li-Ion Battery Charger
MP26028 1A Linear Li-Ion Battery Charger
MP26028EQ 1A Linear Li-Ion Battery Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP2670 is a high-performance single cell Li-Ion/Li-Polymer battery charger protection circuit. By integrating high voltage input protection into the charger IC, the MP2670 can tolerate an input surge up to +30V. The device features input over voltage protection (OVP), battery over voltage protection (BOVP) and over charge current protection (OCP). The device also provides fault indications to the system when any of the protection events happens. For guaranteed safe operation, the MP2670 monitors its own internal temperature and turns off the MOSFET bridging VIN and OUT when the die temperature exceeds 150oC. The MP2670 is available in a 10-pin 3mm x 3mm QFN package.