Datasheet4U Logo Datasheet4U.com

MP24833-A - White LED Driver

General Description

The MP24833-A is a 55V, 3A, white LED driver suitable for step-down, inverting step-up/stepdown, and step-up applications.

The MP24833A achieves 3A of output current with excellent load and line regulation over a wide input supply range.

Key Features

  • include thermal shutdown, cycle-by-cycle peak current limiting, open-string protection, and output short-circuit protection (SCP). The MP24833-A incorporates both DC and PWM dimming into a single control pin. The separate input reference ground pin allows for direct enable and/or dimming control for a positive-to-negative power conversion. The MP24833-A requires a minimal number of readily available, standard, external components and is available in a SOIC-8 EP package. MP24833-A 55V, 3A, White.

📥 Download Datasheet

Other Datasheets by Monolithic Power Systems

Part Number Description
MP24833-AGN White LED Driver
MP24833 White LED Driver
MP24833GN White LED Driver
MP2483 Programmable Frequency White LED Driver
MP2483DQ Programmable Frequency White LED Driver
MP2483DS Programmable Frequency White LED Driver
MP2480 3A High Power LED Driver
MP2480DN 3A High Power LED Driver
MP2481 1.4MHz White LED Driver
MP2481DH 1.4MHz White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP24833-A is a 55V, 3A, white LED driver suitable for step-down, inverting step-up/stepdown, and step-up applications. The MP24833A achieves 3A of output current with excellent load and line regulation over a wide input supply range. Current mode operation provides a fast transient response and eases loop stabilization. Full protection features include thermal shutdown, cycle-by-cycle peak current limiting, open-string protection, and output short-circuit protection (SCP). The MP24833-A incorporates both DC and PWM dimming into a single control pin. The separate input reference ground pin allows for direct enable and/or dimming control for a positive-to-negative power conversion.