Datasheet4U Logo Datasheet4U.com

MP2460 - Synchronous Step-Down Converter

General Description

The MP2460 is a high-frequency, step-down switching converter with integrated high-side and low-side power MOSFETs.

The device can provide up to 0.6A of output current with current mode control for fast loop response.

Key Features

  • such as cycle-by-cycle current limiting, shortcircuit protection (SCP) with hiccup mode, and thermal shutdown in the event of excessive power dissipation. The MP2460 is available in a TSOT23-6 package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP2460 Microwave Schottky Ring Quads M-Pulse Microwave

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2460GJ Synchronous Step-Down Converter
MP2403 250kHz Integrated Synchronous Step-Down Converter
MP2403DN 250kHz Integrated Synchronous Step-Down Converter
MP2410 Step-Down LED Driver
MP2410A LED Driver
MP2410AGJ LED Driver
MP2410AGJE LED Driver
MP2410GJ Step-Down LED Driver
MP2410GJE Step-Down LED Driver
MP24183 White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP2460 45V, 0.6A, 1.7MHz, Synchronous Step-Down Converter in a TSOT23-6 Package DESCRIPTION The MP2460 is a high-frequency, step-down switching converter with integrated high-side and low-side power MOSFETs. The device can provide up to 0.6A of output current with current mode control for fast loop response. The device’s wide 4.5V to 45V input voltage range accommodates a variety of step-down applications, and the 1μA shutdown mode quiescent current allows the device to be used in battery-powered applications. The MP2460 uses a high duty cycle and low-dropout mode when the input voltage is low. The MP2460 achieves high power conversion efficiency across a wide load range by scaling down the switching frequency under light-load conditions. This reduces switching and gate driving losses.