Datasheet4U Logo Datasheet4U.com

MP1593 - 385kHz Step-Down Converter

General Description

The MP1593 is a step-down regulator with an internal Power MOSFET.

It achieves 3A of continuous output current over a wide input supply range with excellent load and line regulation.

Current mode operation provides fast transient response and eases loop stabilization.

Key Features

  • 3A Output Current.
  • Programmable Soft-Start.
  • 100mΩ Internal Power MOSFET Switch.
  • Stable with Low ESR Output Ceramic Capacitors.
  • Up to 95% Efficiency.
  • 20μA Shutdown Mode.
  • Fixed 385kHz Frequency.
  • Thermal Shutdown.
  • Cycle-by-Cycle Over Current Protection.
  • Wide 4.75V to 28V Operating Input Range.
  • Output Adjustable from 1.22V.
  • Under-Voltage Lockout.
  • Available in 8-Pin SOIC Package.

📥 Download Datasheet

Other Datasheets by Monolithic Power Systems

Part Number Description
MP1593DN 385kHz Step-Down Converter
MP1591 330KHz Step-Down Converter
MP1591DN 330KHz Step-Down Converter
MP1591DS 330KHz Step-Down Converter
MP150 Offline Primary-Side Regulator
MP150GJ Offline Primary-Side Regulator
MP150GS Offline Primary-Side Regulator
MP1519 High Efficiency Charge Pump 4 White LED Driver
MP1519DQ High Efficiency Charge Pump 4 White LED Driver
MP1530 Triple Output Step-Up Plus Linear Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology MP1593 3A, 28V, 385kHz Step-Down Converter DESCRIPTION The MP1593 is a step-down regulator with an internal Power MOSFET. It achieves 3A of continuous output current over a wide input supply range with excellent load and line regulation. Current mode operation provides fast transient response and eases loop stabilization. Fault condition protection includes cycle-by-cycle current limiting and thermal shutdown. An adjustable soft-start reduces the stress on the input source at startup. In shutdown mode the regulator draws 20µA of supply current. The MP1593 requires a minimum number of readily available external components, providing a compact solution. EVALUATION BOARD REFERENCE Board Number EV1593DN-00A Dimensions 2.1”X x 1.3”Y x 0.