Datasheet4U Logo Datasheet4U.com

HR1000AGS - Resonant Half-Bridge Controller

This page provides the datasheet information for the HR1000AGS, a member of the HR1000A Resonant Half-Bridge Controller family.

Datasheet Summary

Description

The HR1000A is a controller designed specifically for the resonant half-bridge topology.

It provides two drive-signal channels that output complementary signals at a 50% duty cycle.

Features

  • br>.
  • including latched shutdown, auto-recovery, brown-out protection, and overtemperature protection.
  • improve converter design safety without engendering additional circuit complexity. The IC provide 1.5A/2A source/sink capability for both high-side and low-side gate drivers. The HR1000A is available in a SO-16 package.

📥 Download Datasheet

Datasheet preview – HR1000AGS

Datasheet Details

Part number HR1000AGS
Manufacturer MPS
File Size 901.71 KB
Description Resonant Half-Bridge Controller
Datasheet download datasheet HR1000AGS Datasheet
Additional preview pages of the HR1000AGS datasheet.

📁 Similar Datasheet

  • HR1 - on-chip resistor PNP silicon epitaxial transistor (NEC)
  • HR1124S - Toy single channel DC motor driver (HEROIC)
  • HR1154D - Toy single channel DC motor driver (HEROIC)
  • HR1198N300C - TFT LCD (Hongrui Chuangzhan)
  • HR1253N350F - TFT LCD (Hongrui Chuangzhan)
  • HR1256N240A - TFT LCD (Hongrui Chuangzhan)
  • HR1265N220A - TFT LCD (Hongrui Chuangzhan)
  • HR1330N200B - LCD (Hongrui Chuangzhan)
  • HR15-12 - VRLA Rechargeable Battery (B.B. Battery)
  • HR1502N283A - TFT LCD (Hongrui Chuangzhan)
Other Datasheets by MPS
  • HR1000A - Resonant Half-Bridge Controller
  • HR1000 - Resonant Half-Bridge Controller
  • HR1000HS - Resonant Half-Bridge Controller
  • HR1001A - Enhanced LLC Controller
  • HR1001AGS - Enhanced LLC Controller
  • HR1002 - Enhanced LLC Controller
  • HR1002GS - Enhanced LLC Controller
  • HR1200 - Digital PFC+LLC Combo Controller

Full PDF Text Transcription

Click to expand full text
The Future of Analog IC Technology HR1000A Resonant Half-Bridge Controller DESCRIPTION The HR1000A is a controller designed specifically for the resonant half-bridge topology. It provides two drive-signal channels that output complementary signals at a 50% duty cycle. An internal fixed dead-time of 350ns between the two complementary gate signals guarantees zero-voltage switching during the transient and enables high-frequency operation. The integrated bootstrap diode simplifies the external driving circuit for the high-side switch. It can withstand up to 600V with immunity against high dV/dt noise. Modulating the switching frequency regulates the topology output voltage. A programmable oscillator can set both the maximum and minimum switching frequencies.
Published: |