Datasheet4U Logo Datasheet4U.com

AM-180 - Cascadable Thin Film Amplifier

Download the AM-180 datasheet PDF. This datasheet also covers the AM-180-MA variant, as both devices belong to the same cascadable thin film amplifier family and are provided as variant models within a single manufacturer datasheet.

General Description

M/A-COM’s AM-180 is a feedback amplifier with high intercept and compression points.

This amplifier is packaged in a TO-8 package.

Due to the internal power dissipation the thermal rise should be minimized.

Key Features

  • +14 dBm Typical 1 dB Compression.
  • 5 dB Typical Noise Figure.
  • 1.4:1 Typical VSWR.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (AM-180-MA-COM.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
AM-1801C Silicon Solar Cell Sanyo
AM-1805C Silicon Solar Cell Sanyo
AM-1815C Silicon Solar Cell Sanyo
AM-1816C Silicon Solar Cell Sanyo
AM-1819C Silicon Solar Cell Sanyo

Other Datasheets by MACOM Technology Solutions

Part Number Description
AM-183 Cascadable Thin Film Amplifier
AM-117 Low Noise Amplifier
AM-119 High Performance Amplifier
AM-123 High Performance Amplifier
AM-132 High Performance Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AM-180 / AMC-180 Cascadable Thin Film Amplifier, 10 dB Gain, 10 - 2000 MHz Features  +14 dBm Typical 1 dB Compression  5 dB Typical Noise Figure  1.4:1 Typical VSWR Description M/A-COM’s AM-180 is a feedback amplifier with high intercept and compression points. This amplifier is packaged in a TO-8 package. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-180 is ideally suited for use where a high intercept, high reliability amplifier is required. Outline Drawing: TO-8-1 * Rev. V4 RF OUT .220 (5.6) MIN .220 (5.6) MAX DC IN RF IN .150 (3.8) TYP. .300 (7.6) TYP. GND 4X Ø .018+/-.005 (0.46+/-0.13) .450 (11.