Datasheet4U Logo Datasheet4U.com

AM-160 - Low Noise Amplifier

Download the AM-160 datasheet PDF. This datasheet also covers the AM-160-MA variant, as both devices belong to the same low noise amplifier family and are provided as variant models within a single manufacturer datasheet.

General Description

M/A-COM’s AM-160 is a coupler feedback amplifier with high intercept and compression points.

The use of coupler feedback minimizes noise figure and current in a high intercept amplifier.

This amplifier is packaged in a flatpack with flanges.

Key Features

  • 1.6 dB Typical Midband Noise Figure.
  • +19 dBm Typical 1 dB Compression Point.
  • +30 dBm Typical Third Order Intercept.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (AM-160-MA-COM.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
AM-1606C Silicon Solar Cell Sanyo
AM-1024600-070IP LCD Amson
AM-1024600B3TMQW-00H LCD AMPIRE
AM-1024600BTMQW-00H LCD AMPIRE
AM-1024600BTMQW-T00H LCD AMPIRE

Other Datasheets by MACOM Technology Solutions

Part Number Description
AM-162 Low Noise Amplifier
AM-117 Low Noise Amplifier
AM-119 High Performance Amplifier
AM-123 High Performance Amplifier
AM-132 High Performance Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AM-160 Low Noise Amplifier, 28 dB Gain, 100 - 600 MHz Features  1.6 dB Typical Midband Noise Figure  +19 dBm Typical 1 dB Compression Point  +30 dBm Typical Third Order Intercept Description M/A-COM’s AM-160 is a coupler feedback amplifier with high intercept and compression points. The use of coupler feedback minimizes noise figure and current in a high intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the metal flatpack the thermal rise is minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-160 is ideally suited for use where a high intercept, high reliability amplifier is required. FP-9 Rev. V3 Absolute Maximum Ratings 1 Parameter Max.