Datasheet4U Logo Datasheet4U.com

IS32LT3178 - 10-TO-200MA CONSTANT-CURRENT LED DRIVER

This page provides the datasheet information for the IS32LT3178, a member of the IS32LT3177 10-TO-200MA CONSTANT-CURRENT LED DRIVER family.

Datasheet Summary

Description

The IS32LT3177 and IS32LT3178 are adjustable linear current devices with excellent temperature stability.

A single resistor is all that is required to set the operating current from 10mA to 200mA.

Features

  • Low-side current sink - Adjustable from 10mA to 150mA (SOT236)/200mA (SOP-8-EP) with external resistor selection.
  • Wide input voltage range from - 2.9V to 40V (IS32LT3178) - 5V to 40V (IS32LT3177) with a low dropout of typical 1.0V at 150mA.
  • Up to 1kHz PWM input (IS32LT3178 only).
  • Protection features: - 0.6%/K current roll off at high temp over 145°C for thermal protection - Output current limit - Thermal shutdown.
  • Up to 0.77W (SOT23-6)/2.32W (SOP-8-E.

📥 Download Datasheet

Datasheet preview – IS32LT3178

Datasheet Details

Part number IS32LT3178
Manufacturer Lumissil
File Size 609.57 KB
Description 10-TO-200MA CONSTANT-CURRENT LED DRIVER
Datasheet download datasheet IS32LT3178 Datasheet
Additional preview pages of the IS32LT3178 datasheet.

📁 Similar Datasheet

Other Datasheets by Lumissil

Full PDF Text Transcription

Click to expand full text
IS32LT3177/78 10-TO-200MA CONSTANT-CURRENT LED DRIVER FOR AUTOMOTIVE June 2024 GENERAL DESCRIPTION The IS32LT3177 and IS32LT3178 are adjustable linear current devices with excellent temperature stability. A single resistor is all that is required to set the operating current from 10mA to 200mA. The devices can operate from an input voltage from 2.9V to 40V with a minimal voltage headroom of 1.0V (Typ.) at 150mA. Designed with a low dropout voltage; the device can drive LED strings close to the supply voltage without switch capacitors or inductors. The IS32LT3177/78 simplifies designs by providing a stable current without the additional requirement of inductors, FETs or diodes.
Published: |