Datasheet4U Logo Datasheet4U.com

IS32FL3740 - 3x4 DOTS MATRIX LED DRIVER

Datasheet Summary

Description

The IS32FL3740 is a general purpose 3×4 LEDs matrix driver with 1/12 cycle rate.

The device can be programmed via an I2C compatible interface.

Each LED can be dimmed individually with 8-bit × 8 PWM data which allowing 1024 steps of linear dimming.

Features

  • 3 Auto Breathing Modes which are noted as ABM-1, ABM-2 and ABM-3. For each Auto Breathing Mode, there are 4 timing characters which include current rising / holding / falling / off time and 3 loop characters which include Loop-Beginning / Loop-Ending / Loop-Times. Every LED can be configured to be any Auto Breathing Mode or NoBreathing Mode individually. Additionally each LED open and short state can be detected, IS32FL3740 store the open or short information in Open-Short Registers. The Open-Sh.

📥 Download Datasheet

Datasheet preview – IS32FL3740

Datasheet Details

Part number IS32FL3740
Manufacturer Lumissil
File Size 813.49 KB
Description 3x4 DOTS MATRIX LED DRIVER
Datasheet download datasheet IS32FL3740 Datasheet
Additional preview pages of the IS32FL3740 datasheet.

📁 Similar Datasheet

Other Datasheets by Lumissil

Full PDF Text Transcription

Click to expand full text
IS32FL3740 3×4 DOTS MATRIX LED DRIVER WITH INDIVIDUAL AUTO BREATH FUNCTION August 2022 GENERAL DESCRIPTION The IS32FL3740 is a general purpose 3×4 LEDs matrix driver with 1/12 cycle rate. The device can be programmed via an I2C compatible interface. Each LED can be dimmed individually with 8-bit × 8 PWM data which allowing 1024 steps of linear dimming. IS32FL3740 features 3 Auto Breathing Modes which are noted as ABM-1, ABM-2 and ABM-3. For each Auto Breathing Mode, there are 4 timing characters which include current rising / holding / falling / off time and 3 loop characters which include Loop-Beginning / Loop-Ending / Loop-Times. Every LED can be configured to be any Auto Breathing Mode or NoBreathing Mode individually.
Published: |