IS31LT3952 Datasheet PDF - Lumissil CONSTANT-CURRENT 1.5-AMPERE PWM DIMMABLE BUCK REGULATOR LED DRIVER Specs

IS31LT3952 - CONSTANT-CURRENT 1.5-AMPERE PWM DIMMABLE BUCK REGULATOR LED DRIVER

Datasheet Summary

Description

The IS31LT3952 is a DC-to-DC switching converter that integrates an N-channel MOSFET to operate in a buck configuration.

The device can operate from a wide input voltage between 4.5V and 38V and provides a constant current of up to 1.5A for driving a single LED or multiple series connected LEDs.

Features

Wide input voltage supply from 4.5V to 38V - Withstand 40V load dump.
True average output current control.
1.5A maximum output over operating temperature range.
Cycle-by-cycle current limit.
Integrated high-side MOSFET switch.
Dimming via direct logic input or power supply voltage.
Internal control loop compensation.
Under-voltage lockout (UVLO) and thermal shutdown protection.
2μA low power shutdown.
Spread spectrum to optimize EMI.
Robust.

Datasheet Details

Part number	IS31LT3952
Manufacturer	Lumissil
File Size	766.34 KB
Description	CONSTANT-CURRENT 1.5-AMPERE PWM DIMMABLE BUCK REGULATOR LED DRIVER
Datasheet	IS31LT3952 Datasheet
Additional preview pages of the IS31LT3952 datasheet.

📁 Similar Datasheet

IS31LT3910 - UNIVERSAL HIGH BRIGHTNESS LED DRIVER (ISSI)

IS31LT3916 - Offline LED driver (ISSI)

IS31LT3918 - HIGH VOLTAGE LED LIGHTING DRIVER (ISSI)

IS31LT3929 - Flyback configuration LED driver (ISSI)

IS31LT3932 - High PF universal LED Driver (ISSI)

IS31LT3935 - TRIAC Dimmable AC/DC LED Driver (ISSI)

IS31LT3938 - High Voltage LED Lighting Driver (ISSI)

IS31LT3948 - PFM MODE BOOST LED DRIVER (ISSI)

IS31LT3117 - 4-CHANNEL CONSTANT CURRENT REGULATOR (ISSI)

IS31LT3135 - MAIN/SUB DUAL-CHANNEL LED DRIVER (ISSI)

Full PDF Text Transcription

Click to expand full text

IS31LT3952 CONSTANT-CURRENT 1.5-AMPERE PWM DIMMABLE BUCK REGULATOR LED DRIVER WITH FAULT PROTECTION August 2021 GENERAL DESCRIPTION The IS31LT3952 is a DC-to-DC switching converter that integrates an N-channel MOSFET to operate in a buck configuration. The device can operate from a wide input voltage between 4.5V and 38V and provides a constant current of up to 1.5A for driving a single LED or multiple series connected LEDs. The external resistor, RISET, is used to set a constant LED output current, while allowing the output voltage to be automatically adjusted for a variety of LED configurations. The IS31LT3952 operates in a fixed frequency mode during switching. There is an external resistor connected between the VCC and TON pins used to configure the on-time (switching frequency).

Published: Jun 29, 2024 |