Datasheet4U Logo Datasheet4U.com

LT1029A - 5V Bandgap Reference

Download the LT1029A datasheet PDF. This datasheet also covers the LT1 variant, as both devices belong to the same 5v bandgap reference family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • 0.2% Output Tolerance.
  • 0.6Ω Shunt Impedance.
  • 700µA to 10mA Operating Current.
  • Pin Compatible with LM136-5.
  • 20ppm/°C Max Drift.
  • Output Voltage Trim does not Affect Drift.
  • Can be Used as Positive or Negative Reference U.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LT1-029.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LT1029 5V Bandgap Reference
LT1020 Micropower Regulator/Comparator
LT1021 Precision Reference
LT1022 High Speed / Precision JFET Input Operational Amplifier
LT1024 Dual /Matched Picoampere / Microvolt Input /Low Noise Op Amp
LT1025 Micropower Thermocouple Cold Junction Compensator
LT1026 Voltage Converter
LT1027 Precision 5V Reference
LT1028 Ultralow Noise Precision High Speed Op Amps
LT1001 Precision Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LT1029/LT1029A 5V Bandgap Reference U U FEATURES ■ 0.2% Output Tolerance ■ 0.6Ω Shunt Impedance ■ 700µA to 10mA Operating Current ■ Pin Compatible with LM136-5 ■ 20ppm/°C Max Drift ■ Output Voltage Trim does not Affect Drift ■ Can be Used as Positive or Negative Reference U APPLICATIO S ■ A-to-D and D-to-A Converters ■ Precision Regulators ■ Precision Current Sources ■ V to F and F to V Converters TYPICAL APPLICATIO 15V R1 10k 5V LT1029 LT1029 R2 10k –5V –15V LT1029 • TA01 DESCRIPTIO The LT®1029 is a 5V bandgap reference intended for use in the shunt or “Zener” mode, allowing it to be used as either a positive or negative reference. The output is pretrimmed to ± 0.2% accuracy with 20ppm/°C maximum temperature drift.