Datasheet4U Logo Datasheet4U.com

LD3301-X - 1 and 2-Channel 5V or 3.3V GMR Head Preamplifier

Description

The LD3301-1, LD3301-2 are BiCMOS devices that support a 1-channel (2-channel) GMR Preamplifier.

Features

  • and thresholds are controlled through a serial port interface. This product requires +3.3V or +5V supply voltage. Available in flip-chip or TSSOP packages. GMR resistor range: 25Ω to 65Ω Programmable 5 bit GMR head bias current: Ib = 2mA-9.75mA Programmable gain control: 130V/V & 200V/V @ Rmr = 35Ω, Ib = 6mA Wide bandwidth: BW = 250 MHz at -1dB @ Rmr = 35Ω Programmable booster for wide bandwidth Equivalent input noise: Vn = 0.8nV/√Hz @ Rmr = 35Ω Impedance matched differential inputs for WDX and.

📥 Download Datasheet

Datasheet Details

Part number LD3301-X
Manufacturer Ldic
File Size 128.44 KB
Description 1 and 2-Channel 5V or 3.3V GMR Head Preamplifier
Datasheet download datasheet LD3301-X Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LD330 Setra Local Display SETRA
LD330 Low Voltage Grade Brush Motors MCG
LD30-26B03R2 AC/DC Converter MORNSUN
LD30-26B05R2 AC/DC Converter MORNSUN
LD30-26B09R2 AC/DC Converter MORNSUN

Other Datasheets by Ldic

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LD3301-X 1 and 2-Channel 5V or 3.3V GMR Head Preamplifier DESCRIPTION The LD3301-1, LD3301-2 are BiCMOS devices that support a 1-channel (2-channel) GMR Preamplifier. They are designed for use with 4-terminal magnetoresistive recording heads, providing a low noise GMR head amplifier, GMR bias current control, thin film write driver, write current control, thermal asperity detection and correction. Fast recovery mode can be also programmed to put the chip faster in read mode from any other existing modes. The device is programmable for read gain, GMR resistance measurement, and thermal asperity threshold level. The device allows multiple channel write functions for servo writing. Half or all of the heads can be simultaneously selected in the servo write mode.
Published: |