Datasheet4U Logo Datasheet4U.com

ISPPAC-POWR604 - In-System Programmable Power Supply

Description

or product names are trademarks or registered trademarks of their respective holders.

The specifications and information herein are subject to change without notice.

© 2004 Lattice Semiconductor Corp.

Features

  • Monitor and Control Multiple Power Supplies.
  • Simultaneously monitors and sequences up to six power supplies.
  • Sequence controller for power-up conditions.
  • Provides four output control signals.
  • Programmable digital and analog circuitry.

📥 Download Datasheet

Datasheet Details

Part number ISPPAC-POWR604
Manufacturer Lattice Semiconductor
File Size 1.03 MB
Description In-System Programmable Power Supply
Datasheet download datasheet ISPPAC-POWR604 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISP0912 Bluetooth Low Energy Module Insight SiP
ISP091201 Bluetooth Low Energy Module Insight SiP
ISP1040B Intelligent SCSI Processor QLogic Corporation
ISP1040B SCSI I/O Processor Qlogic
ISP1040C Intelligent SCSI Processor QLogic Corporation

Other Datasheets by Lattice Semiconductor

Part Number Description
ispPAC-POWR605 In-System Programmable Power Supply Supervisor
ISPPAC-POWR607 In-System Programmable Power Supply
ispPAC-POWR6AT6 In-System Programmable Power Supply Monitoring and Margining Controller
ispPAC-POWR1014 In-System Programmable Power Supply Supervisor / Reset Generator and Sequencing Controller
ispPAC-POWR1014A In-System Programmable Power Supply Supervisor / Reset Generator and Sequencing Controller

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com ispPAC-POWR604 In-System Programmable Power Supply Sequencing Controller and Monitor January 2004 Data Sheet Features ■ Monitor and Control Multiple Power Supplies • Simultaneously monitors and sequences up to six power supplies • Sequence controller for power-up conditions • Provides four output control signals • Programmable digital and analog circuitry Application Block Diagram Voltage Monitor 6 Voltage Monitor 5 2.5-5V Supply 6 Analog Inputs 1.0uF 0.1uF ■ Embedded PLD for Sequence Control • Implements state machine and input conditional events • In-System Programmable (ISP™) through JTAG and on-chip E2CMOS® VMON1 VMON2 VMON3 VMON4 VMON5 VMON6 VDD VDD VDDINP OUT5 OUT6 OUT7 OUT8 CPU_RESETN BROWNOUT_INT LOAD_ENABLE POWER_OK Digital Logic CPU/ASIC Card etc.
Published: |