KVR1333D3N9-8G Datasheet 8GB 2Rx8 1G x 64-Bit PC3-10600 CL9 240-Pin DIMM

Manufacturer: Kingston

KVR1333D3N9-8G 8gb 2rx8 1g x 64-bit pc3-10600 cl9 240-pin dimm by Kingston - Datasheet Preview

Datasheet Details

Part number	KVR1333D3N9-8G
Manufacturer	Kingston
File Size	70.56 KB
Description	8GB 2Rx8 1G x 64-Bit PC3-10600 CL9 240-Pin DIMM
Datasheet	KVR1333D3N9-8G Datasheet

General Description

This document describes ValueRAM's 1G x 64-bit (8GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components.

The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V.

This 240-pin DIMM uses gold contact fingers.

Overview

Memory Module Speciﬁcations KVR1333D3N9/8G 8GB 2Rx8 1G x 64-Bit PC3-10600 CL9 240-Pin DIMM Important Information: The module defined in this data sheet is one of several configurations available under this part number.

While all configurations are compatible, the DRAM combination and/or the module height may vary from what is described here.

Key Features

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply VDDQ = 1.5V (1.425V ~ 1.575V) 667MHz fCK for 1333Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 7 (DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4.

More Datasheets from Kingston

Part Number	Description
KVR1333D3D8R9S-4GHB	4GB 512M x 72-Bit PC3-10600 CL9 Registered w/Parity 240-Pin DIMM
KVR1333D3S8N9-2G	2GB 1Rx8 256M x 64-Bit PC3-10600 CL9 240-Pin DIMM
KVR13N9S8-4	4GB 1Rx8 512M x 64-Bit PC3-10600 CL9 240-Pin DIMM
KVR667D2N5-1G	1GB 128M x 64-Bit DDR2-667 CL5 240-Pin DIMM
KVR667D2N5-2G	2GB 256M x 64-Bit DDR2-667 CL5 240-Pin DIMM
KVR800D2N5-1G	1GB 128M x 64-Bit DDR2-800 CL5 240-Pin DIMM
KVR800D2N5-2G	2GB 256M x 64-Bit DDR2-800 CL5 240-Pin DIMM