Datasheet4U Logo Datasheet4U.com

NJU6311 - Quartz Crystal Oscillator IC

General Description

The NJU6311 is a fundamental quartz crystal oscillator, up to 50MHz.

The oscillation amplifier incorporates feedback resistor and capacitors (Cg, Cd), therefore, it requires no external component expect quartz crystal, and realizes very low standby current with NAND circuit.

Key Features

  • Operating Voltage 2.0 to 5.5V Maximum Oscillation Frequency 50MHz Low Operating Current High Fan-out Selectable Divider IOH/IOL=6mA @2.5V IOH/IOL=8mA @3.3V IOH/IOL=16mA @5.0V fo, fo/2, fo/4, fo/8, fo/16 and fo/32 Oscillation Stop and Output Stand-by Function 3-State Output Buffer Oscillation Capacitors Cg and Cg on-die Package Outline Thin-Die/TVSP-10 C-MOS Technology PAD.

📥 Download Datasheet

Other Datasheets by New Japan Radio

Part Number Description
NJU6324 QUARTZ CRYSTAL OSCILLATOR
NJU6330 QUARTZ CRYSTAL OSCILLATOR
NJU6338 QUARTZ CRYSTAL OSCILLATOR
NJU6339 QUARTZ CRYSTAL OSCILLATOR
NJU6364 High Frequency-Stability Fundamental Quartz Crystal Oscillator IC
NJU6365 Low Operating Current Fundamental Quartz Crystal Oscillator IC
NJU6367 Fundamental Quartz Crystal Oscillator
NJU6368 High Drive Fundamental Quartz Crystal Oscillator
NJU6370 Over Tone Quartz Crystal Oscillator
NJU6373 QUARTZ CRYSTAL OSCILLATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJU6311 Quartz Crystal Oscillator IC with Selectable Divider GENERAL DESCRIPTION The NJU6311 is a fundamental quartz crystal oscillator, up to 50MHz. The oscillation amplifier incorporates feedback resistor and capacitors (Cg, Cd), therefore, it requires no external component expect quartz crystal, and realizes very low standby current with NAND circuit. The output frequency select 6-stage to use selectable switch IN1, IN2, and IN3, divided output are f0, f0/2, f0/4, f0/8, f0/16 and f0/32. The drivability of the 3-state output buffer is 16mA@5V, thus it can drive C-MOS load. Furthermore, the package is Thin-VSP10. PAKAGE OUTLINE NJU6311C-D NJU6311RB2 FEATURES Operating Voltage 2.0 to 5.