Datasheet4U Logo Datasheet4U.com

NJM2672 - DUAL H-BRIDGE DRIVER

Description

PACKAGE OUTLINE NJM2672 is a dual H-bridge driver, it consists of a LS-TTL compatible logic input stage and pair of H-bridges with a protection diode.

The maximum output current is 500mA per channel.

Features

  • S 4V to 45V.
  • Operating Voltage.
  • Maximum Output Current 500mA.
  • Internal Thermal Shutdown Circuit.
  • Dead Band Protector.
  • Specially matched to Translator (Stepping motor controller ) NJU7380.
  • Package DIP18.
  • BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJM2606 LOW VOLTAGE DC MOTOR CONTROLLER New Japan Radio
NJM2611 SERVO MOTOR CONTROLLER New Japan Radio
NJM2624A BRUSH LESS DC MOTOR PRE-DRIVER New Japan Radio
NJM2625 PWM TYPE 3-PHASE DC BRUSHLESS MOTOR CONTOROL IC New Japan Radio
NJM2660A Single-Phase DC Brushless Motor Pre-driver New Japan Radio

Other Datasheets by New Japan Radio

Part Number Description
NJM2670 DUAL H-BRIDGE DRIVER
NJM2671 STEPPER MOTOR CONTROLLER / DRIVER
NJM2673 STEPPER MOTOR DRIVER
NJM2675 H-BRIDGE DRIVER
NJM2606A LOW VOLTAGE DC MOTOR CONTROLLER

Full PDF Text Transcription

Click to expand full text
NJM2672 www.DataSheet4U.com DUAL H-BRIDGE DRIVER ■ GENERAL DESCRIPTION ■ PACKAGE OUTLINE NJM2672 is a dual H-bridge driver, it consists of a LS-TTL compatible logic input stage and pair of H-bridges with a protection diode. The maximum output current is 500mA per channel. NJM2672 is able to make up pulse input stepper motor system when using with translator NJU7380. NJM2672D ■ FEATURES 4V to 45V • Operating Voltage • Maximum Output Current 500mA • Internal Thermal Shutdown Circuit • Dead Band Protector •Specially matched to Translator (Stepping motor controller ) NJU7380 • Package DIP18 ■ BLOCK DIAGRAM Vcc E1 Phase1 Dis1 Logic MA1 MB1 VMM1 TSD VMM2 Phase2 Dis2 MB2 Logic MA2 GND E2 -1- NJM2672 www.DataSheet4U.com ■ PIN CONFIGURATION 1 18 2 17 3 16 4 15 5 14 6 13 1.
Published: |