Datasheet4U Logo Datasheet4U.com

ISL75051SRH - Ultra-Low Dropout Regulator

Download the ISL75051SRH datasheet PDF. This datasheet also covers the ISL75051SEH variant, as both devices belong to the same ultra-low dropout regulator family and are provided as variant models within a single manufacturer datasheet.

Description

Input supply pins.

VOUT in regulation signal.

Logic low defines when VOUT is not in regulation.

Features

  • DLA SMD 5962-11212.
  • Output current up to 3.0A at TJ = +150°C.
  • Output accuracy ±1.5% over MIL temperature range.
  • Ultra low dropout: - 65mV (typical) dropout at 1.0A - 225mV (typical) dropout at 3.0A.
  • SET mitigation with no added filtering/diodes.
  • Input supply range: 2.2V to 6.0V.
  • Fast load transient response.
  • Shutdown current of 1µA (typical).
  • Output adjustable using external resistors.
  • PSRR 66dB (typical).

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ISL75051SEH-Intersil.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
ISL70001SRH Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator Intersil Corporation
ISL71090SEHF25 Radiation Hardened Ultra Low Noise / Precision Voltage Reference Intersil Corporation
ISL7119RH Radiation Hardened High Speed Dual Voltage Comparator Intersil Corporation
ISL7124SRH Quad Operational Amplifiers Intersil Corporation
ISL72026SEH 3.3V Radiation Tolerant CAN Transceiver Intersil Corporation

Other Datasheets by Intersil (Renesas)

Part Number Description
ISL75051SEH Ultra-Low Dropout Regulator
ISL75051ASEH Ultra-Low Dropout Regulator
ISL75052SEH High Voltage LDO
ISL75054M Radiation Tolerant Ultra Low Noise 1A LDO
ISL70001ASEH Rad Hard and SEE Hard 6A Synchronous Buck Regulator

Full PDF Text Transcription

Click to expand full text
NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL75051ASEH ISL75051SEH, ISL75051SRH 3A, Radiation Hardened, Positive, Ultra-Low Dropout Regulator DATASHEET FN8294 Rev.7.00 May 22, 2017 The ISL75051SEH, ISL75051SRH are radiation hardened low-voltage, high-current, single-output LDOs specified for up to 3.0A of continuous output current. These devices operate over an input voltage range of 2.2V to 6.0V and are capable of providing output voltages of 0.8V to 5.0V adjustable, based on resistor divider setting. Dropout voltages as low as 65mV can be realized using the device. The OCP pin allows the short-circuit output current limit threshold to be programmed by means of a resistor from the OCP pin to GND. The OCP setting range is from 0.5A minimum to 8.5A maximum.
Published: |