Datasheet4U Logo Datasheet4U.com

ISL73051ASEH - Ultra-Low Dropout Regulator

Download the ISL73051ASEH datasheet PDF. This datasheet also covers the ISL75051ASEH variant, as both devices belong to the same ultra-low dropout regulator family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (ISL75051ASEH-Intersil.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
ISL73096RH Radiation Hardened Ultra High Frequency NPN/PNP Transistor Intersil Corporation
ISL73127RH Radiation Hardened Ultra High Frequency NPN/PNP Transistor Intersil Corporation
ISL73128RH Radiation Hardened Ultra High Frequency NPN/PNP Transistor Arrays Intersil Corporation
ISL70001SRH Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator Intersil Corporation
ISL71090SEHF25 Radiation Hardened Ultra Low Noise / Precision Voltage Reference Intersil Corporation

Other Datasheets by Intersil (Renesas)

Part Number Description
ISL73052SEH High Voltage LDO
ISL73002SEH Radiation Hardened and SEE Hardened 12A Synchronous Buck Regulator
ISL73005SEH Radiation Hardened Dual Output 3A Synchronous Buck and LDO Regulator
ISL73006SLH 1A Point-of-Load Regulator
ISL73007SEH 3A Point-of-Load Regulator

Full PDF Text Transcription

Click to expand full text
DATASHEET ISL75051ASEH, ISL73051ASEH 3A, Radiation Hardened, Positive, Ultra-Low Dropout Regulator FN8964 Rev.3.00 May 16, 2019 The ISL75051ASEH and ISL73051ASEH are radiation hardened low-voltage, high-current, single-output LDOs specified for up to 3.0A of continuous output current. These devices operate across an input voltage range of 2.2V to 6.0V and can provide output voltages of 0.8V to 5.0V adjustable, based on the resistor divider setting. Dropout voltages as low as 65mV can be achieved using the device. The OCP pin allows the short-circuit output current limit threshold to be programmed by a resistor from the OCP pin to GND. The OCP setting range is 0.5A minimum to 8.5A maximum. The resistor sets the constant current threshold for the output under fault conditions.
Published: |