Datasheet4U Logo Datasheet4U.com

X4285 - CPU Supervisor

Download the X4285 datasheet PDF. This datasheet also covers the X4283 variant, as both devices belong to the same cpu supervisor family and are provided as variant models within a single manufacturer datasheet.

Description

The X4283, X4285 combines four popular functions, Power-on Reset Control, Watchdog Timer, Supply Voltage Supervision, and Block Lock protect serial EEPROM memory in one package.

This combination lowers system cost, reduces board space requirements, and increases reliability.

Features

  • Selectable watchdog timer.
  • Low VCC detection and reset assertion.
  • Four standard reset threshold voltages.
  • Adjust low VCC reset threshold voltage using special programming sequence.
  • Reset signal valid to VCC = 1V.
  • Low power CMOS.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (X4283_IntersilCorporation.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription

Click to expand full text
® X4283, X4285 128K, 16K x 8 Bit Data Sheet May 23, 2006 FN8121.1 CPU Supervisor with 128K EEPROM FEATURES • Selectable watchdog timer • Low VCC detection and reset assertion —Four standard reset threshold voltages —Adjust low VCC reset threshold voltage using special programming sequence —Reset signal valid to VCC = 1V • Low power CMOS —<20µA max standby current, watchdog on —<1µA standby current, watchdog OFF —3mA active current • 128Kbits of EEPROM —64 byte page write mode —Self-timed write cycle —5ms write cycle time (typical) • Built-in inadvertent write protection —Power-up/power-down protection circuitry —Protect 0, 1/4, 1/2, all or 64, 128, 256 or 512 bytes of EEPROM array with programmable Block Lock™ protection • 400kHz 2-wire interface www.DataSheet4U.com • 2.7V to 5.
Published: |