Datasheet4U Logo Datasheet4U.com

X40411 - Dual Voltage Monitor

Download the X40411 datasheet PDF. This datasheet also covers the X40410 variant, as both devices belong to the same dual voltage monitor family and are provided as variant models within a single manufacturer datasheet.

Description

The X40410/11/14/15 combines power-on reset control, watchdog timer, supply voltage supervision, and secondary voltage supervision, and Block Lock™ protect serial EEPROM in one package.

This combination lowers system cost, reduces board space requirements, and increases reliability.

Features

  • Dual voltage detection and reset assertion.
  • Standard reset threshold settings See Selection table on page 2.
  • Adjust low voltage reset threshold voltages using special programming sequence.
  • Reset signal valid to VCC = 1V.
  • Monitor three voltages or detect power fail.
  • Independent Core Voltage Monitor (V2MON).
  • Fault detection register.
  • Selectable power-on reset timeout (0.05s, 0.2s, 0.4s, 0.8s).
  • Selectable watchdog timer.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (X40410_IntersilCorporation.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
X40420 Dual Voltage Monitor Xicor
X40421 Dual Voltage Monitor Xicor
X40430 Triple Voltage Monitor Xicor
X40431 Triple Voltage Monitor Xicor
X40010 Dual Voltage Monitor with Integrated CPU Supervisor Xicor

Other Datasheets by Intersil (Renesas)

Part Number Description
X40410 Dual Voltage Monitor
X40414 Dual Voltage Monitor
X40415 Dual Voltage Monitor
X40420 Dual Voltage Monitor
X40421 Dual Voltage Monitor

Full PDF Text Transcription

Click to expand full text
® X40410, X40411, X40414, X40415 4kbit EEPROM Data Sheet March 28, 2005 FN8116.0 Dual Voltage Monitor with Integrated CPU Supervisor FEATURES • Dual voltage detection and reset assertion —Standard reset threshold settings See Selection table on page 2. —Adjust low voltage reset threshold voltages using special programming sequence —Reset signal valid to VCC = 1V —Monitor three voltages or detect power fail • Independent Core Voltage Monitor (V2MON) • Fault detection register • Selectable power-on reset timeout (0.05s, 0.2s, 0.4s, 0.8s) • Selectable watchdog timer interval (25ms, 200ms,1.4s, off) • Low power CMOS —25µA typical standby current, watchdog on —6µA typical standby current, watchdog off • 4Kbits of EEPROM —16 byte page write mode —5ms write cycle time (typical) www.DataSheet4U.
Published: |